4)Enter a name according to the instructions below, then press [select/int’com] ([set] on the base). If no name is required, go to step 5.
•The name can be up to fourteen characters.
•Use [
/tone/
] and [#/
] to move the cursor to the desired location.
•Press [delete/channel] ([
] (delete) on the base) to delete characters as needed or press and hold to delete all characters.
Refer to the letters on the number keys to select the desired characters.
With each press of a number key, the displayed character appears in the following order: upper case letters first, lower case letters next and finally the number corresponding to the key.
Note: If the next character uses the same number key, you must press [#/
] to move the cursor over. Otherwise the next time you press the number key, it changes the character that was previously set.
For example, to enter Movies.
1)Press [6] once. Then press [#/
] to move the cursor to the right.
2)Press [6] six times.
3)Press [8] six times.
4)Press [4] six times.
5)Press [3] five times.
6)Press [7] eight times.
Number of times key is pressed
keys | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
1
2abc
3def
4ghi
5jkl
6mno
7pqrs
8tuv
9wxyz
0oper
22