If you make a mistake while entering a name
Use [
/tone/
] or [#/
] to move the cursor to the incorrect character.
Press [delete/channel] ([
] (delete) on the base) to erase the wrong character. Then enter the correct character. To delete all characters, press and hold [delete/channel] ([
] (delete) on the base).
5) STORE NUMBER is displayed. The cursor flashes indicating that the phone is ready for the number to be entered.
6) Use the keypad to enter the phone number; each number can be up to twenty digits. If you need the phone to pause during the dialing sequence, press [redial/pause] to insert a
7)Press [select/int’com] ([set] on the base). You will hear a confirmation tone, and the
following screen appears. Memory storage is complete.
8) After about two seconds, the following screen displays all the speed dial memory entries.
9) Press [end] ([
] (play/stop) on the base) to exit memory setup mode. The phone returns to standby.
Note: When storing numbers into memory, if the base or cordless handset is idle (i.e., no key is pressed) for more than thirty seconds, it will beep rapidly, and the phone will return to standby.
23