Activating Call Screening
Your phone allows you to listen to callers leaving you a message. This feature can be turned on or off with the following steps:
1) | Press [clock/menu] on the base. |
| Call | Screening: |
2) | Press [cid select/ ] to move the pointer to select CALL SCREENING, and then | 0 |
| < > |
|
|
|
| On |
| press [set]. |
| Press | / or set |
|
|
|
|
3)Press [cid select/
] or [cid select/
] to select ON or OFF.
4)Press [set]. You will hear a confirmation tone.
Setting the Number of Rings
The ring time setting allows you to set the number of rings the caller hears before your answering machine plays the outgoing message. You can set the ring time to answer after two, four, or six rings. If you enable the Toll Saver, the answering machine picks up after two rings if you have new messages and after four rings if there are none.
1) | Press [clock/menu] on the base. |
| Ring | Time: |
|
2) | Press [cid select/ ] to move the pointer to select RING TIME, and then press | 0 |
| < > | Saver |
|
|
|
| Toll | |
| [set]. |
| Press | / | or set |
|
|
|
|
|
3)Press [cid select/
] or [cid select/
] to select a Ring Time (TOLL SAVER, 2 TIMES, 4 TIMES, or 6 TIMES).
4)Press [set]. You will hear a confirmation tone.
43