XM Satellite Radio Operations

English

This unit can control the satellite radio receiver (XM Mini-Tuner).

Note:

•When the function is differ depending to the connected receiver, they are distinguished by the following notations:

“XM”: for an XM Satellite Radio

Selecting a Satellite Radio mode

1.Press the [SRC] button.

The system changes to the specified Satellite Radio mode.

Channel input directly

This function allows you to input the channel No. directly.

1.Press and hold the [DISP] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [x] or [v] button to select “CHANNEL”.

3.Press the [ ] button.

4.Press the [w] or [z] button to input the channel No.

5.Press and hold the [ ] button for 1 second

Selecting a band	or longer to select the channel.
1. Press the [BND] button to select a band.

This changes the reception band as follows:

XM1 ➜ XM2 ➜ XM3 ➜ XM1 ...

●Information displayed during reception The following information is displayed when the satellite radio cannot be received normally.

•When the antenna is not be connected :

“CHECK ANTENNA”

•When the mini tuner is not be connected :

“CHECK XM TUNER”

•When no signal is received: “NO SIGNAL”

•When a channel is being tuned in (no signal is yet received): “LOADING”

•A channel without a broadcast has been selected: “OFF AIR”

•An unviable channel has been selected: “CH UNAVL”

•A channel not covered by your contract: “UNAUTH”

Confirming your XM ID

1.Press the [x] or [v] button to switch to channel 0.

2.The XM ID No. appears in the display.

Displaying channel labels

1.Press the [DISP] button to select the desired channel label.

Channel ➜ Category ➜ Name (Title) ➜ Channel ...

Setting channel tuning

This function allows you to tuning a channel directly or indirectly.

∗The factory default setting is “OFF”.

1.Press and hold the [DISP] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [x] or [v] button to select “DIRECT”.

3.Press the [w] or [z] button to select “ON” or “OFF”.

• ON:

Press the [ ] button to switch to another channel after tuning operations. Otherwise, the operation will switch to the other channel automatically after 2 seconds.

• OFF:

Press the [ ] button to switch to another channel after tuning operations. Otherwise, the operation will return to the previous channel after 5 seconds.