Operations Common to Each Mode

English

5-1. Press and hold the [ ] button (2 sec.) The entered Personal Code will be set, and it will return to the previous screen.

Note:

•Write down your Personal Code in case you forget it.

•Erasing the Personal Code

2-1. Select “CODE”.

3-1. Press the [ ] button.

The ERASE PERSONAL CODE screen appears.

2.Press the [w] or [z] button to select “ON” or “OFF”.

• OFF:

Only when the mini tuner is connected to this unit, the XM source name will appear in the display when you switch the operation mode.

• ON:

Even if the mini tuner is connected to this unit or not, the XM source name will appear in the display when you switch the operation mode.

4-1. Enter the Personal Code currently.

5-1. Press and hold the [ ] button (2 sec.) or longer.

Enter a Personal Code mode is cancelled.

•When the ENTER PERSONAL

CODE screen appears

The ENTER PERSONAL CODE screen will be displayed when turning the ACC power on after performing the following operations:

•The car battery was replaced.

•The backup power was cut off.

•The [RESET] button was pressed.

Note:

•If you have lost your Personal Code, please contact Clarion customer service.

1.Enter your Personal Code currently set.

2.When the correct Personal Code is entered, the unit will restart from the initial startup screen.

Notes:

•When you enter a wrong Personal Code, the message “LOCK - - - -” is displayed and the Personal Code entry is prohibited for a while.

This prohibited time is changed according to the number of times of wrong code entry as follows:

•1 to 6 times: 15 seconds

•7 times or more: 15 minutes

Saving XM source name

This function allows the XM source name to be saved in the display, whether the mini tuner is connected to the unit or not.

∗The factory default setting is “ON”. 1. Select “XM SRC”.

●Turning the screen saver function on

or off

This unit is provided with the screen saver

function which allows you to show various kinds of patterns and characters in the operation status indication area of the display in a random order. You can turn on or off this function. If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display.

∗The factory default setting is “ON”.

2-1. Select “SCRN SVR”.

3-1. Press the [w] or [z] button to select the

setting.

Each time you press the [w] or [z] button, the setting changes in the following order: “MESSAGE” ↔ “OFF” ↔ “ON”

●Entering message information

Message up to 30 characters long can be stored in memory and displayed as a type of screen saver setting.

∗The factory default setting is “WELCOME TO CLARION”.

2-1. Select “MESSAGE INPUT”.

3-1. Press the [ ] button.

3-2. Press and hold the [BND] button (1 sec.) to clear the old message.

3-3. Press the [x] or [v] button to move the cursor.

3-4. Press the [BND] button to select a character type. Each time you press the [BND] button, the character type changes in the following order:

Capital letters ➜ Numbers ➜ Symbols ➜ Capital letters…

3-5. Press the [w] or [z] button to select the desired character.

22 CX609