Clarion CX609 owner manual Sirius Satellite Radio Operations, Presetting a category

SIRIUS Satellite Radio Operations

Receiving stations selected by		Scan function
category		There are two scan modes: the category scan
Satellite Radio allows you to select broadcast		mode and the preset scan mode.
		During scanning channels are displayed in
channel category (contents).
1. Press and hold the [BND] button (1 sec.) to		abbreviated form, the display mode cannot be
		switched.
	select the category selection mode.
		● Preset scan (PRESET SCN)
	∗ It press once again, return to the channel
	selection mode.	A preset scan scans the channels (up to 18
2.	Press the [w] or [z] button to change the	channels) stored in the preset memory about
	category item.	every 10 seconds.
3.	Press the [x] or [v] button to tune in a	Press and hold the [		] button (1 sec.) to
	station.	select the preset scan mode. And start the
Notes:
		preset scanning.
• When the category selection mode is entered,		● Category scan (CAT SCN)
the category of the last received channel is		In a category scan, broadcast channels in the
displayed first.
		same category as the current channel are
• The category selection mode is canceled when
		selected about every 10 seconds.
no channel with the selected category can be
		Press the [	] button to select the category
found.
• The [x] or [v] button are not pressed within		scan mode. And start the category scanning.

7 seconds, the category selection mode is	Note:
canceled, and resumes to the channel mode.
	• Category scanning is not available when no
Presetting a category	category is defined for the current channel.

Acategory can be preset by registering specific categories in [DIRECT] buttons 1 to 6. Then the desired category can be recalled by pressing the corresponding [DIRECT] button.

1.Press and hold the [BND] button (1 sec.) to enter the category mode.

2.Press the [w] or [z] button to select a category.

3.Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current category into preset memory.

Notes:

•When the name of a channel stored in memory is changed by a broadcasting channel, the display may show a channel name that differs from the stored name.

•A channel stored in memory may be discontinued at the option of the broadcasting channel.

•If no operation is performed for more than 1 second, category seek tuning can automatically tune in a receivable broadcast channel category.

English

CX609 31