Clarion MP3 Player CX609 Manual - Operations & Settings Guide

Operations Common to Each Mode

To change adjustment setting

1.Press and hold the [DISP] button (1 sec.) to switch to the adjustment selection display.

2.Press the [x] or [v] button to select the “item name”.

“CLOCK” ↔ “CONTRAST” ↔

“SETTINGS” ↔ “COLOR” ↔ “CODE” ↔ “XM SRC” ↔ “SCRN SVR” ↔ “MESSAGE INPUT” ↔ “SCROLL” ↔ “DIMMER” ↔ “BLINKLED” ↔ “A-CANCEL” ↔ “REAR/S-W” ↔ “SYSTEM CHECK”

3.Press the [w] or [z] button to select the “desired setting value”.

∗In the case of display blinking “ENT”, you can press the [ ] button to adjust the setting value.

∗After completing settings, press the [DISP] button to return to the previous mode.

●Setting the clock

2-1. Select “CLOCK”.

3-1.	Press the [	] button.

3-2.	Press the [x] or [v] button to select the
	hour or the minute.
3-3.	Press the [w] or [z] button to set the
	correct time.
	∗ The clock is displayed in 12-hour format.
3-4.	Press the [	] button to store the time into


	memory.

Note:

•You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the car’s battery or take out this unit, the clock is reset. While setting the clock, if another button or operation is selected, the clock set mode is canceled.

●Setting the contrast

You can adjust the display contrast to match the angle of installation of the unit.

∗The factory default setting is “10”. (Adjustment level: 1 to 16)

2-1. Select “CONTRAST”.

3-1. Press the [w] or [z] button to adjust the contrast.

●Displaying the settings

The number of indicator of this unit decreases, you can see the state of current settings at any operation mode.

2-1. Select “SETTINGS”.

3-1. Press the [w] or [z] button to display the state of current settings.

∗When the setting is selected, after 1 second the current state will be displayed.

For example:

after 1 second,

●Setting the button illumination

2-1. Select “COLOR”.

3-1. Press the [w] or [z] button to select the color type.

•Setting COLOR SCAN mode

As selecting “COLOR SCAN”, the color automatically changes.

∗The factory default setting is “COLOR SCAN”.

∗After 3 seconds the color changes to the other.

• Setting USER mode

The factory default setting is “RED 8” (red), “GREEN 8” (green), “BLUE 8” (blue).

As selecting “USER COLOR 1, 2, 3”, press the [ ] button to enter the setting.

1.Press the [x] or [v] to select “RED”, “GREEN” or “BLUE”.

2.Press the [w] or [z] button to select from 0 to 8.

3.Press and hold the [ ] button for 2 seconds or longer to store the color in memory and cancel the setting mode.

●Setting the anti-theft function

(CATS)

“CATS” is the acronym of “Clarion Anti-Theft System”. When you set a PIN code (called as “Personal Code”), a theft is prevented by disabling the operation of the unit at the theft.

•Setting your Personal Code

2-1. Select “CODE”.

English

3-1. Press the [ ] button.

The set personal code screen appears.

4-1. Press the [DIRECT] buttons [1]-[6] to enter your desired 4-digit Personal Code.

CX609 21