CD/MP3/WMA/AAC Operations Disc-In-Play function

CD/MP3/WMA/AAC Operations

Disc-In-Play function

As long as the ignition key is turned to the ON or ACC position, this function allows you to turn the power to the unit and start playing the disc automatically when the disc is inserted even if the power is not turned on.

•If the CD is not inserted easily, there may be another CD in the mechanism or the unit may

require service.

•Discs not bearing the or mark and CD-ROMs cannot be played by this unit.

•Some CDs recorded in CD-R/CD-RW mode may not be usable.

English

CAUTION

•Do not try to put your hand or fingers in the disc insertion slot. Also never insert foreign objects into the slot.

•Do not insert discs where adhesive comes out from cellophane tape or a rental CD label, or discs with marks where cellophane tape or rental CD labels were removed. It may be impossible to extract these discs from the unit and they may cause the unit to break down.

Backup Eject function

Just pressing the [Q] button, ejects the disc

even if the power to the unit was not turned on.

Press the [EJECT] button. Remove the disc after it is ejected.

Notes:

•If a CD (12 cm) is left in the ejected position for 15 seconds, the CD is automatically reloaded (Auto reload).

•If you force a CD into before auto reloading, this can damage the CD.

Listening to a disc already loaded in the unit

Press the [SRC] button to select the CD/MP3/ WMA/AAC mode.

When the unit enters the CD/MP3/WMA/AAC mode, play starts automatically.

If there is no disc loaded, the indication “NO DISC” appears in the title display.

Loading a CD

Insert a CD into the center of the CD SLOT with the labeled side facing up. “LOADING” appears in the display, the CD enters into the slot, and the play starts.

Notes:

• Never insert foreign objects into the CD SLOT.