Roland AR-200 owner manual Card Compatibility with Other Models in the AR Series

Page 17

Cards Handled by the AR-200

Card Compatibility with Other Models in the AR Series

If You’re Using a Legacy Model

In case the card you are using with the AR-200 has been used on one of Roland’s previous AR-2000, AR-100, or AR-1 devices; or if using an AR-200 card on one of these legacy models, the operational specifications are shown below.

•When using a card formatted on the AR-2000 (compatible models: AR- 2000/100/1) with the AR-200.

You can carry out recording and playback without having to make any special changes.

Although playback may be carried out as is, the card cannot be used for recording.

fig.card-06

Recording, PLAY

Formatted on AR-2000

•When using a card formatted on the AR-200 with a legacy model (AR- 2000/100/1)

Cards formatted on the AR-200 cannot be used with these previous models.

fig.card-07					You must perform Card
					You must perform Card
					Convert and Phrase
					Convert and Phrase
					Convert on the AR-3000 in
					order to make the card
					formatted on the AR-200 to
					formatted on the AR-200 to
					be usable with a legacy
					be usable with a legacy
					model (AR-2000/100/1).

Basic Editing Operations

17

Image 17

Contents Page Using the Unit Safely Page Placement Power SupplyMaintenance Before Using PC CardsContents Mode SW Settings Troubleshooting Error messages Regarding CardsMidi Implementation Midi Implementation Chart Specification AppendicesMain Features Front panel Panel DescriptionsRear panel Bottom chassisRefer also to DC power supply p Turning On the PowerRack Mounting Important Notes on Heat Radiation InstallationAttaching the Rubber Feet Included Items Rack-Mounting the AR-200 InstallationAttaching the Card Protector Device with the AR-200 Control Output Connectors p Using the Control Input and Output ConnectorsExamples of Usage and Connection for the AR-200 Together with Other Equipment System ExamplesExamples of Usage and Connection for the AR-200 Using the Midi ConnectorsControlling the AR-200 With Midi Signals Midi Control p Playing a Variety of Phrases in Succession What You Can Do Usage TipsRepeat Playback of the Same Phrase Types of Usable Cards Cards Handled by the AR-200Card Storage Times and Number of Phrases Formatting a CardCards Handled by the AR-200 Procedure for Formatting CardsImportant Notes on Handling Cards Card Compatibility with Other Models in the AR Series If You’re Using a Legacy ModelRecording Audio Connecting External DevicesRecording Units-Phrases Monitor Output During Recording and Recording StandbyRDAC-Gradesampling frequency REC Mode SW-3 Procedure for RecordingRecording Audio Amount of cardCard Audio Recording Time Chart P.53 RDAC-Mode Signal Processing FormatREC Mode SW 4Line Thru Output Recording Type Stereo/MonoREC Mode SWWhat is mono recording Switching the Power On ProcedureImportant Notes on Making ConnectionsInformation Recorded on the Card Checking What You RecordedPress the Play button and the phrase will playback Playback Using the Panel Manual PlaybackDeleting All Phrases Deleting PhrasesDeleting Single Phrases Procedure for Recording Midi What is a Midi Phrase?Recording and Playing Midi Data Midi Phrase PhrasesPlayback Using Control Input and Other Input Procedure for Playing Back MidiRecording and Playing Midi Data Midi Phrase Manual playbackPlayback By Card Data Assigning Phrases to the Terminals AR-200 SettingsSelecting the Control Input Mode Operational Specifications for Control Input Playback Operational Specifications for Direct Playback Last-InBasic Operation of Direct Playback Reverse Priority Priority OrderSpecifying Phrases in Binary Notation Binary Playback What Is Binary Playback?/Use and ApplicationsConnectors Used in Binary Playback Basic Operation of Binary Playback Operational Specifications of Binary PlaybackTo Specify Phrases with Binary Signals Phrase Number / Binary Signal chart What is Terminal Rec/Use and Applications Operational Specifications of Interval PlaybackRepeated Playback of Phrases Interval Playback Basic Operation of Interval PlaybackOperational Specifications for Terminal Rec Connecting EquipmentConnectors Used in Terminal Rec Presence or Absence of PhrasesErase Switching the Terminal Recording ModePlayback 001 00000000 Important Note on Using the Control Input and Output Ports What is the Busy Out Signal?/ Connecting DevicesOutput of Busy Out Signals In Dual Mono Mode p Starting Another Device Busy OutControlling Another Device Control Out What is the Control Out Signal? Connecting DevicesOutput of Control Out Signals In Dual Mono Mode p Memo Applications Guide What is Midi Control?/What You Can Do Using Midi Control Controlling the AR-200 with Midi Signals Midi controlPlayback of Phrases Using Midi Signals Assignment of Phrases to Note Numbers Midi Note Map Controlling the AR-200 with Midi Signals Midi controlWhen Playing Back Midi Phrases Using Midi Signals Midi Control Signals That Can Be Received Receive Messages Midi Receive channel Settings Midi channelProcedure for Making the Midi Receive Channel Settings Midi Note OutWhat is AR-LINK?/What You Can Do Using AR-LINK Playback with AR-LINK SignalsExample of Connecting to an Synchronized Audio PhraseSelecting the AR-200’s Operation AR Settings ProcedureTo Users of the AR-2000/100 Legacy Models Line Out Thru Setting During Phrase PlaybackOther Useful Functions During Phrase Playback Other Useful Functions During Phrase Playback Line Thru Output SpecificationsAppendices About recording TroubleshootingAbout playback About playback and recording of Midi phrasesCard made on the AR-3000 TroubleshootingOthers Fig.er-3 Error messagesRegarding Cards Card Audio Recording Time ChartAppendices Settings When a Card Is FormattedRecorded Phrase Data AR-LINK Setting AR-3000 settings that can be usedMidi settings Mode Switch Specifications Mode SW SettingsDC power supply Control I/O Connector specificationsReceive data Media Player Section Midi ImplementationControl Change Program ChangeMidi Machine Control MMC Midi ImplementationMidi Time Code Recognized message for sync Transmitted message which are receivedTransmitted message which are produced Message not memorized during recording Transmit data Midi Recorder Section Messages received for detecting trouble in Midi connectionExclusive Communication Parameter Address MapExclusive Address Table Phrase Select AR-200/3000 Midi Implementation Midi Recording Section Specification Specification Dimentions Input/Output StandardAR-LINK IndexAfrica InformationAvis 02235223 ’03-8-7N