Controlling the
Playing Back Phrases Assigned to the Connectors (Direct Playback)
Operational Specifications for Direct Playback (Last-In)
Basic Operation of Direct Playback (Reverse Priority)
What Is Direct Playback (Reverse Priority)?/Use and Applications
By inputting control signals directly to Port Nos. 1 through 9, you can play back the phrases assigned to those numbers. Up to 9 phrases can be played back. Assign phrases 1 through 9 beforehand to Port Nos. 1 through 9.
This is very convenient when you want to specify a desired phrase directly using a switch, relay, sensor, or other such means.
fig.inp-10
Port No. 1
Port No. 2
STOP Port
AUDIO OUTPUT
Playback:
| 0002 |
| 0001 |
|
|
|
|
0001 Interrupted
|
|
|
|
|
|
A Control Signal | A Control Signal | A Control Signal | A Control Signal | A Control Signal | A Control Signal |
Port No. | 1 | 2 | 3 | 4 | 5 |
| 9 |
Phrase | 0001 | 0002 | 0003 | 0004 | 0005 |
| 0009 |
Connecting External Devices
Connectors Used for Direct Play
1 through 9: Inputting a control signal directly to the connector with the number corresponding to the phrase starts playback of the phrase.
“10 (STOP) “: Stop phrase playback.
Input control signals to Port Nos. 1 through 9.
→This plays the phrase assigned to the connector. stopping:
Input control signals to Port No. 10 (STOP).
→This stops playback of the phrase.
"Operational Specifications for Control Input Playback"
(p. 28)
Priority Order
The most recently input control signal is given priority in playback.
If a new and different control signal is input during playback of a phrase, playback of the current phrase is stopped, and playback of the specified phrase then begins.
In addition to the connectors just described, shorting the “11/12 (GND)” (ground) connectors enables “On.”
fig.inp-09
STOP | Select a Phrase | |||
|
|
|
|
|
10 9 | 1 | |||
fig.inp-11
Port No. 1
Port NO.2
AUDIO OUTPUT
0001 | 0002 |
0001 Interrupt
12 11
GND
"Important Notes on Making Connections and Switching
the Power On and Off" (p. 9)
Playback is repeated while the control signal is continuously input.
fig.inp-12
Port No.1
0001 | 0001 | 0001 |
AUDIO OUTPUT
30