Roland AR-200 owner manual Midi Receive channel Settings Midi channel, Midi Note Out

Page 44
Volume level when playback of the phrase starts
Changes the positioning of the sound in the left and right channels
Changes the master volume

Controlling the AR-200 with MIDI Signals (MIDI control)

AR-200 Settings

MIDI Receive channel Settings (MIDI channel)

This sets the MIDI receive channel. MIDI allows you to independently control two or more devices over a single MIDI cable. For example, when the MIDI channel for the sending device is set to “1,” then unless the MIDI channel of the receiving device (here, the AR-200) is also set to “1,” the MIDI message is not transmitted.

Off : MIDI messages will not playback phrases.

1-16: Only the MIDI messages on the selected channel are received and played back.

All : MIDI messages of any channel will playback phrases.

With cards formatted on the AR-2000, you can check the MIDI reception channel settings, but they cannot be changed.

Procedure for Making the MIDI Receive Channel Settings

1.While holding down the PLAY button, insert the card into the card slot.

The MIDI indicator will blink, and the display will indicate the receive channel.

2.Press the [ ]/[ ] dial to select the MIDI Receive channel (OFF/1-16/ALL).

3.Press the PLAY button to set the specified MIDI receive channel.

The MIDI indicator lights, and the phrase number is displayed.

•If you press the STOP button, the MIDI receive channel setting will be canceled.

MIDI Control Signals That Can Be Received (Receive Messages)

If you use a card whose settings have been made on the AR- 3000, the following MIDI message can be received by the AR- 200.

Note On Velocity:

Panpot (CC10):

Expression (CC11):

For more a detailed explanation of MIDI, refer to "MIDI Implementation" and "MIDI Implementation Chart" (p. 58-

p. 64).

MIDI Note Out

Moreover, by using an optional AR-3000 to create and edit phrases, the following function are also possible.

For detailed information, please refer to the AR-3000 user’s manual.

If MIDI Note Out is set to “ON,” then when an audio phrase is played back, the MIDI Note Number On/Off signals set in "MIDI Note Map" (p. 43) are output from the MIDI OUT connector.

In this case, if two or more note numbers have been assigned to that playback phrase, only the lowest note number will be transmitted.

The MIDI signals are output through the channel set through the MIDI Receive channel.

If the MIDI Receive channel is set to :

“OFF”:

There is no output

“1-16”:

Only the MIDI signals in the selected channel

 

are input and output

“ALL”:

Output is through Channel 1

*If you are using Note messages to control two or more AR-200 units, set the MIDI Note Trigger setting of the slave AR-200 units to “Trig.””Trigger” is selected when the card is formatted. However, this setting cannot be changed on the AR-200.

*Even when playing back MIDI phrases, Note Number On/Off signals are not output.

44

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Page Using the Unit Safely Page Power Supply PlacementMaintenance Before Using PC CardsContents Troubleshooting Error messages Regarding Cards Mode SW SettingsMidi Implementation Midi Implementation Chart Specification AppendicesMain Features Panel Descriptions Front panelRear panel Bottom chassisTurning On the Power Refer also to DC power supply pRack Mounting Important Notes on Heat Radiation InstallationAttaching the Rubber Feet Included Items Rack-Mounting the AR-200 InstallationAttaching the Card Protector Using the Control Input and Output Connectors Device with the AR-200 Control Output Connectors pExamples of Usage and Connection for the AR-200 Together with Other Equipment System ExamplesExamples of Usage and Connection for the AR-200 Using the Midi ConnectorsControlling the AR-200 With Midi Signals Midi Control p Playing a Variety of Phrases in Succession What You Can Do Usage TipsRepeat Playback of the Same Phrase Cards Handled by the AR-200 Types of Usable CardsCard Storage Times and Number of Phrases Formatting a CardCards Handled by the AR-200 Procedure for Formatting CardsImportant Notes on Handling Cards If You’re Using a Legacy Model Card Compatibility with Other Models in the AR SeriesConnecting External Devices Recording AudioRecording Units-Phrases Monitor Output During Recording and Recording StandbyProcedure for Recording RDAC-Gradesampling frequency REC Mode SW-3Recording Audio Amount of cardRDAC-Mode Signal Processing FormatREC Mode SW 4 Card Audio Recording Time Chart P.53Line Thru Output Recording Type Stereo/MonoREC Mode SWWhat is mono recording Procedure Switching the Power OnImportant Notes on Making ConnectionsChecking What You Recorded Information Recorded on the CardPlayback Using the Panel Manual Playback Press the Play button and the phrase will playbackDeleting All Phrases Deleting PhrasesDeleting Single Phrases What is a Midi Phrase? Procedure for Recording MidiRecording and Playing Midi Data Midi Phrase PhrasesProcedure for Playing Back Midi Playback Using Control Input and Other InputRecording and Playing Midi Data Midi Phrase Manual playbackPlayback By Card Data Assigning Phrases to the Terminals AR-200 SettingsSelecting the Control Input Mode Operational Specifications for Direct Playback Last-In Operational Specifications for Control Input PlaybackBasic Operation of Direct Playback Reverse Priority Priority OrderSpecifying Phrases in Binary Notation Binary Playback What Is Binary Playback?/Use and ApplicationsConnectors Used in Binary Playback Basic Operation of Binary Playback Operational Specifications of Binary PlaybackTo Specify Phrases with Binary Signals Phrase Number / Binary Signal chart Operational Specifications of Interval Playback What is Terminal Rec/Use and ApplicationsRepeated Playback of Phrases Interval Playback Basic Operation of Interval PlaybackConnecting Equipment Operational Specifications for Terminal RecConnectors Used in Terminal Rec Presence or Absence of PhrasesErase Switching the Terminal Recording ModePlayback 001 00000000 What is the Busy Out Signal?/ Connecting Devices Important Note on Using the Control Input and Output PortsOutput of Busy Out Signals In Dual Mono Mode p Starting Another Device Busy OutControlling Another Device Control Out What is the Control Out Signal? Connecting DevicesOutput of Control Out Signals In Dual Mono Mode p Memo Applications Guide What is Midi Control?/What You Can Do Using Midi Control Controlling the AR-200 with Midi Signals Midi controlPlayback of Phrases Using Midi Signals Assignment of Phrases to Note Numbers Midi Note Map Controlling the AR-200 with Midi Signals Midi controlWhen Playing Back Midi Phrases Using Midi Signals Midi Receive channel Settings Midi channel Midi Control Signals That Can Be Received Receive MessagesProcedure for Making the Midi Receive Channel Settings Midi Note OutPlayback with AR-LINK Signals What is AR-LINK?/What You Can Do Using AR-LINKExample of Connecting to an Synchronized Audio PhraseSettings Procedure Selecting the AR-200’s Operation ARTo Users of the AR-2000/100 Legacy Models Line Out Thru Setting During Phrase PlaybackOther Useful Functions During Phrase Playback Line Thru Output Specifications Other Useful Functions During Phrase PlaybackAppendices Troubleshooting About recordingAbout playback About playback and recording of Midi phrasesCard made on the AR-3000 TroubleshootingOthers Error messages Fig.er-3Card Audio Recording Time Chart Regarding CardsAppendices Settings When a Card Is FormattedRecorded Phrase Data AR-LINK Setting AR-3000 settings that can be usedMidi settings Mode SW Settings Mode Switch SpecificationsControl I/O Connector specifications DC power supplyMidi Implementation Receive data Media Player SectionControl Change Program ChangeMidi Machine Control MMC Midi ImplementationMidi Time Code Recognized message for sync Transmitted message which are receivedTransmitted message which are produced Message not memorized during recording Messages received for detecting trouble in Midi connection Transmit data Midi Recorder SectionExclusive Communication Parameter Address MapExclusive Address Table Phrase Select AR-200/3000 Midi Implementation Midi Recording Section Specification Specification Input/Output Standard DimentionsIndex AR-LINKInformation AfricaAvis 02235223 ’03-8-7N
Top Page Image Contents