Auto Cue
Auto Cue skips the silence at the beginning of an audio track and pauses playback at the point where the audio begins (sound is loud enough for long enough). You can adjust how loud (how many dB) and how long (milliseconds) the audio has to be before play- back is cued.
The Auto Cue Menu settings permit:
•turning Auto Cue On or Off
•adjusting the millisecond period in 5 millisecond intervals from 5 to 95 milliseconds, and
•adjusting the margin sound level that defines where audio begins in
If Normal Play Mode is selected (see Play Mode), when the end of the track is reached Auto Cue pauses playback cued to the sound of the next track.
Default settings are Off, 20 milliseconds, and
1.From stop push and release the MENU/STORE button.
2.Turn the Jog Wheel to select Preset1, 2 or 3.
3.Push and release the Jog Wheel to accept the selected Preset.
4.Turn the Jog Wheel so Auto Cue is displayed and flashing.
Example |
|
display |
5.While Auto Cue is flashing, push and release the Jog Wheel. The On or Off will be flashing.
6.Turn the Jog Wheel to toggle between On and Off.
Example |
|
display |
7.When correct, push and release the Jog Wheel. The display switches to milliseconds flashing.
Example |
|
display |
8.Turn the Jog Wheel to tab through milliseconds (05 - 95 milliseconds).
When correct, push and release the Jog Wheel. The display switches to
Example |
|
display |
9.Turn the Jog Wheel to tab through the margin sound level choices
10.If you are done making Menu changes to the Preset, push and release the MENU/STORE button to save your changes,
stored will be displayed briefly
(or push and release the Stop CANCEL button to cancel all changes).
Display returns to stop mode.
Note:
When Auto Cue is turned On, the PMD570 will continue to search until audio of a significant level is located within the playing track - where the unit will then enter Play/Pause. To end this process, either press stop or turn Auto Cue off in the menu.
- 35 -