Marantz PMD570 manual TrkMkERASE, Display returns to so you can erase another mark, AllMkERASE

Page 41

TrkMkERASE

TrkMkERASE lets you erase all EDL marks of the selected track.

1.Select the TrkMkERASE Menu choice:

While in stop, push and hold the SHIFT button while you push and release the MENU/STORE button. Renumber will appear (flashing) in the display.

2.While Renumber is flashing (for about 3 seconds) turn the Jog Wheel until TrkMkERASE is flashing.

3.Push and release the Jog Wheel while TrkMKERASE is flashing (for about 5 seconds). The display switches to MARK 001 flashing.

MARK

4.Turn the Jog Wheel so the track number you want to erase the marks from is flashing.

Example display

MARK

5.Push and release the Jog Wheel*. EXECUTING will be displayed momentarily.

MARK

The display returns to step 3 so you can erase another mark.

MARK

Push and release the Stop/CANCEL button to exit.

Note:

EDL marks will automatically be renumbered.

*To cancel, push and release the Stop/CANCEL button .

AllMkERASE

AllMkERASE erases all EDL marks on the CF card.

1.Select the AllMkERASE Edit Menu choice:

While in stop, push and hold the SHIFT button while you push and release the MENU/STORE button. Renumber will appear (flashing) in the display.

2.While Edit Menu is flashing (for about 3 seconds) turn the Jog Wheel until AllMkERASE is dis- played and flashing.

3.While AllMkERASE is flashing (5 seconds) press and release the Jog Wheel. AllMkErOK? will be flashing. The display asks you to confirm that you want to erase all EDL Marks on the CF card.

4.While AllMkErOK? is flashing press and release the Jog Wheel to confirm. (Or press and release the Stop/CANCEL button to cancel.)

EXECUTING will be displayed momentarily.

Done will be displayed momentarily.

The PMD570 and the display will return to stop mode.

- 41 -

Image 41

Contents Model PMD570 User Guide Risk of Electric Shock Important Safety Instructions Copyright CE marking only EU version English Edit Menu Table of ContentsEditing and setup Package contents Introduction SetupComputer compatible Audio inputs may be fromEDL marks FeaturesTracks Connect line level XLR equipment for recording 6a. Connect RC600 wiredThis connection makes it easy to Copy audio files to or from yourStart-up Recording setupInitialize Turn to adjust headphone Power ON/OFF buttonVolume ExampleCF card compartment CF card access light greenCard eject button To eject a CF cardDefault display is Default display Is elapsed time on5a. Display button Alternate information displaysTotal label REC labelTrack label Remain labelLower alphanumeric display Mark labelLine label Record iconSelected Preset How to change Presets7a. Menu CurrentlyWith level margin at Example display02dB before Jog WheelHow to select an EDL mark How to select tracks during playbackHow to adjust record level How to adjust record balanceHow to add an EDL mark while recording How to start a new trackStop/CANCEL button Shift buttonAt stop BackTrim L & R Pin 1 groundDigital OUT jack RCA Connectors SpdifAnalog OUT jacks O portUsing serial communication, a RS-232C connectorRemote Menu setting StartPause Menu mode PresetsPCM/MP2/MP3 Table of Preset defaultsHow to select inputs for recording Preset defaultsGeneral Menu procedure How to set or change the Date and time How to set or change the Date Form RecFormat Chart of RecFormat ParametersRecFormat parameters Channels AlgorithmChange to Kbps Push and release the Jog Wheel when correct How to set or change the RecFormat parametersDisplay shows Shows change toWav 44.1 Stereo Bwf Auto Mark Pre RecordAuto Trk Manual TRMinute track TrackSeamlsPly Seamless Play SilentSkp Silent Skip Auto Cue Normal Play ModeRepeat All Repeat TRKEDL Play menu turns EDL Play On or Off EDL PlayOff Display during ID1Dscrpt, ID2Origin, ID3OrRef Broadcast Wave ID numbers Default Menu Default Display returns to so you can erase another track Renumber tracksTrkERASE AllMkERASE TrkMkERASEDisplay returns to so you can erase another mark To Format a CF card Format CF cardPort How to connect via the I/O portSkip marks Locating EDL MarksLoop marks EDL marks and the beginning of a TrackEDL mark types Point How to Edit EDL marksSkip LoopA and LoopBPage Start character End character 0Dh Command formatAscii code @0DS01CR Hand shake flow charts for control commandsHost sends a command that causes a change in PMD570 status Play Status Request Information Code Table of Status Request Status Information codesPCM Care and Maintenance TroubleshootingDigital audio system Specifications1How You Can Get Service Limited WarrantyMarantz is a registered trademark 2004/4