Marantz PMD570 manual EDL Play menu turns EDL Play On or Off, Display during, Remote

Page 37

EDL Play

The EDL Play menu turns EDL Play On or Off.

Off

PMD570 playback does not respond to EDL mark instructions.

On

PMD570 follows EDL mark instructions regarding playback order, skipping sections of recording on the memory card, or repeating (EDL A-B repeat) a section of recording on the memory card. See page 45.

Note:

If EDL Play is at On and there are no EDL marks on the CF card playback is not available. Switch to Off for playback.

Default setting is Off.

1.From stop push and release the MENU/STORE button.

2.Turn the Jog Wheel to select Preset1, 2 or 3.

3.Push and release the Jog Wheel to accept the selected Preset.

4.Turn the Jog Wheel so EDL Play is displayed and flashing.

Example display

5.While EDL Play is flashing, push and release the Jog Wheel. The On or Off will be flashing.

6.Turn the Jog Wheel to toggle between On and Off.

Example display

7.When correct, push and release the Jog Wheel. The display returns to EDL Play flashing.

8.If you are done making Menu changes to the Preset, push and release the MENU/STORE button to save your changes,

stored will be displayed briefly

(or push and release the Stop CANCEL button to cancel all changes).

Display returns to stop mode.

Example

 

 

 

 

 

 

 

 

 

 

TRACKTIME

 

 

 

 

 

 

 

 

display during

L

 

 

 

 

 

 

 

 

 

-dB00 40 20 12

6 2 0

over

EDL play.

R

 

 

 

 

 

 

 

 

TRACK

 

 

 

 

 

 

 

 

 

 

 

 

 

Remote

The Remote Menu setting is for a wired remote (not supplied) plugged into the REMOTE1 Phone jack. (The optional remote Marantz model RC600 that plugs into the REMOTE2 TRRS connector is plug- and-play and has no menu choices.)

There are four remote modes:

•StartPause

Start or pause during recording or playback. If Auto Mark is ON and EDL mark is added when recording resumes.

•StrtPausTR

Start or pause during recording or playback. After a record pause, recording continues on the next track.

•EDL Mark

During record or playback switch remote to on to add an EDL mark.

•Manual TRK

During recording, switch remote to on to incre- ment the track. A new track is created at that point. There is no break in recording.

Default setting is StartPause.

1.From stop push and release the MENU/STORE button.

2.Turn the Jog Wheel to select Preset1, 2 or 3.

3.Push and release the Jog Wheel to accept the selected Preset.

4.Turn the Jog Wheel so Remote is displayed and flashing.

Example display

5.While Remote is flashing, push and release the Jog Wheel. The current remote setting will be flashing.

6.Turn the Jog Wheel to tab through the remote

- 37 -

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Model PMD570 User Guide Risk of Electric Shock Important Safety Instructions Copyright CE marking only EU version English Editing and setup Table of ContentsEdit Menu Package contents Introduction SetupComputer compatible Audio inputs may be fromTracks FeaturesEDL marks Connect line level XLR equipment for recording 6a. Connect RC600 wiredThis connection makes it easy to Copy audio files to or from yourInitialize Recording setupStart-up Turn to adjust headphone Power ON/OFF buttonVolume ExampleCF card compartment CF card access light greenCard eject button To eject a CF cardDefault display is Default display Is elapsed time on5a. Display button Alternate information displaysTotal label REC labelTrack label Remain labelLower alphanumeric display Mark labelLine label Record iconSelected Preset How to change Presets7a. Menu CurrentlyWith level margin at Example display02dB before Jog WheelHow to select an EDL mark How to select tracks during playbackHow to adjust record level How to adjust record balanceHow to add an EDL mark while recording How to start a new trackStop/CANCEL button Shift buttonAt stop BackTrim L & R Pin 1 groundDigital OUT jack RCA Connectors SpdifAnalog OUT jacks O portUsing serial communication, a RS-232C connectorRemote Menu setting StartPause Menu mode PresetsPCM/MP2/MP3 Table of Preset defaultsGeneral Menu procedure Preset defaultsHow to select inputs for recording How to set or change the Date and time How to set or change the Date Form RecFormat Chart of RecFormat ParametersRecFormat parameters Channels AlgorithmChange to Kbps Push and release the Jog Wheel when correct How to set or change the RecFormat parametersDisplay shows Shows change toWav 44.1 Stereo Bwf Auto Mark Pre RecordAuto Trk Manual TRMinute track TrackSeamlsPly Seamless Play SilentSkp Silent Skip Auto Cue Normal Play ModeRepeat All Repeat TRKEDL Play menu turns EDL Play On or Off EDL PlayOff Display duringID1Dscrpt, ID2Origin, ID3OrRef Broadcast Wave ID numbers Default Menu Default TrkERASE Renumber tracksDisplay returns to so you can erase another track Display returns to so you can erase another mark TrkMkERASEAllMkERASE To Format a CF card Format CF cardPort How to connect via the I/O portSkip marks Locating EDL MarksLoop marks EDL marks and the beginning of a TrackEDL mark types Point How to Edit EDL marksSkip LoopA and LoopBPage Start character End character 0Dh Command formatHost sends a command that causes a change in PMD570 status Hand shake flow charts for control commandsAscii code @0DS01CR Play Status Request Information Code Table of Status Request Status Information codesPCM Care and Maintenance TroubleshootingDigital audio system Specifications1How You Can Get Service Limited WarrantyMarantz is a registered trademark 2004/4
Top Page Image Contents