P A I N T I N G
EVOi.324 is readily paintable. The SMC (Sheet Molded Compound) provides a lightly textured surface that any standard household or industrial paint readily adheres to. The result is a sound reinforcement system that is able to blend unobtrusively into the decor of its environment.
Instructions for Painting:
1.It is strongly recommended that EVOi.324 be partially disassembled to obtain optimum results. This requires removing the grill, the handle bar, and suspension point placeholder screws.
A.Remove the grill screw covers by gently prying off.
B.Remove six grill retain screws.
C.Remove four allen head screws from the grill frame.
D.Remove the grill taking care to keep the grill and grill supports together.
E.Remove all six suspension placeholder screws.
F.Remove the four allen screws retaining the handle bar and remove the bar.
2.Prepare all surfaces by wiping off dust and cleaning with a damp cloth. It may be necessary to use a mild household cleaner to remove grease.
3.Carefully mask the aluminum electronics enclosure on the back of the speaker. IT SHOULD NOT BE PAINTED. Removal of the electronics enclosure should only be done by qualified service personnel.
4.Carefully mask the baffle area. Avoid getting paint on the loudspeaker cones or in the waveguide. It’s not a good thing.
5.Apply as many coats of paint as is required. Standard household or industrial paints (i. e. waterbased latex or enamel) will provide the best results. Spraying many thin coats will provide the best results.
6.Assemble the EVOi.324 in reverse order as described in Step One.
Figure 24 - Exploded View for Painting | E |
|
D
C
F
AB
C | E | 17 |
|
EVOi.324