Toshiba RD-XS35SC, RD-XS35SU owner manual Connect to a TV equiped with audio/video inputs

Page 21

3 Connect to a TV equiped with audio/video inputs.

Connect as below for watching received channels or recorded contents. Watching via the RF OUT terminal is not available.

Introduction

(red)	(white)	(yellow)	To OUTPUT
			(S-VIDEO)

	To OUTPUT	To OUTPUT	S-Video cable (not supplied)
	(R/L)	(VIDEO)

If the TV has an S-video input, connect the recorder with an S-video cable. When using an S-video cable, do not connect the yellow video cable.

Video/audio cable (supplied)		TV or monitor with
		TV or monitor with
To S-video input		audio/video inputs
To video inputs	(yellow)
	(white)
To audio input	(red)

4 Connect the power cord of the recorder to a wall outlet.

Make sure that the powered recorder lights the ON/STANDBY indicator on the front panel.

To wall outlet

Connections

Basic setup

Notes

•Refer to the owner’s manual of the connected TV as well.

•When you connect the recorder to your TV, be sure to turn off the power and unplug both units from the wall outlet before any connections.

•If your television set has one audio input, connect the left and right audio outputs of the recorder to a Y cable adapter (not supplied) and then connect to your TV.

•Connect the recorder directly to your TV. If you connect the recorder to a VCR, TV/VCR combination, video selector or AV amplifier, the playback picture may be distorted due to copy protection.

21

Image 21

Contents RD-XS35SU RD-XS35SC See service procedure This HDD/DVD video recorder employs a Laser SystemMay result in hazardous radiation exposure Location of the required label Important Safety Instructions Additional Safety Instructions Precautions When not in useIntroduction Exemptions Power outageWait Introduction PrecautionsConnections Accessories Remote control Batteries AAA x Installation procedureSome differences About this productAbout the hard disc drive HDD Playback RestrictionsUsing different disc types for different purposes For recording / playback Disc Mark Specification RemarksChoosing a disc Disc For playback only Disc Mark Specification RemarksOn DVD-RAM discs Introduction Choosing a discDVD-RAM discs with cartridges are recommended for recording On DVD-R discs On DVD-RW discsMarks on DVD video discs On cleaning discs Structure of disc contentsOn handling discs On storing discsTable of Contents Operating with the remote control Preparation of the remote controlOpen the cover Insert batteries AAA size Close the coverConnection procedure When you connect a TV equipped with audio/ video inputsWhen you connect an audio system Connections Connecting an antenna and TVConnect to a TV equiped with audio/video inputs Connect the power cord of the recorder to a wall outletYou will need to Connecting to cable TV signalThis set-up will allow you to When the satellite system has audio/video outputs Connecting to a satellite systemConnecting the G-LINKcable Connecting to a TV equipped with component video inputs Make the setting on Connecting to an audio systemPage Basic setup Turning the power on Basic setupStarting up the recorder Startup/finishing closing iconsIf a message appears Press To select Setup TV Guide On Screen setupPress To select Change system Settings, then press Enter Press To select No, repeat setup Process, then press EnterSetup selection CountryPress / to select, then press Enter Basic setup TV Guide On Screen setup Cable serviceZIP or postal code Cable connectionCable input Tuning channel for the cable boxCable box brand name Press / to select, then press Enter 13Confirmation 12Antenna connection14Confirmation 15InformationRead the information and press Enter Press Setup Language settingPress / to select Initial settings, then press Enter To select Language, then pressPress Setup to display the setup menu Satellite set top box settingPress Adjust or / to set DBS to Not used or Use Press Enter Basic setup Satellite set top box settingRCA Satellite set top box brand codeOutput sound setting Press / to select Picture/Audio settings, then press EnterPress / to select Audio out select, then press Enter Press / to select the output sound format Once the proper setting is selected, pressTV shape setting Press / to select Display settings, then press EnterPress / to select TV shape, then press Press / to select the picture shape When the proper setting is selected, pressOperating your TV with the remote control Remote control settingsRelease TV Code Take this step according to your preference and usageJVC Brand code tablePress / to select Operational settings, then press Enter Setting up the recorder Press SetupDisabling the remote control for a temporary period Limited One 1 Year Warranty on Parts Limited Ninety 90 Day Warranty on LaborYour Responsibility Rental UnitsHow to Obtain Warranty Services Page Memo Printed on 70% Recycled Paper

Related manuals

Manual 225 pages 61.34 Kb