Installation of INDOOR, Outdoor Unit

Read completely, then follow step by step.

Select the best location

A Indoor unit

■ Do not have any heat or steam near the unit.

■ Select a place where there are no obstacles in front of the unit.

■ Make sure that condensation drainage can be conveniently routed away.

■ Do not install near a doorway.

■ Ensure that the space around the left and right of the unit is more than 30cm(11.8in). The unit should be installed as high on the wall as possible, allowing a minimum of 12cm(4.7in) from ceiling.

■ Use a stud finder to locate studs to prevent unnecessary damage to the wall.

	More than
More than	12cm(4.7in)
More than
30cm(11.8in)
	More than
	30cm(11.8in)
More than 2.3m(7.6ft)

CAUTION

Install the indoor unit on the wall where the height from the floors more than 2.3meters(7.6ft).

A minimum pipe run of 7.5meters(24.6ft) is required to minimize vibration & excessive noise.

■Rooftop Installations:

If the outdoor unit is installed on a roof structure, be sure to level the unit. Ensure the roof structure and anchoring method are adequate for the unit location. Consult local codes regarding rooftop mounting.

If the outdoor unit is installed on root structures or walls, this may result in excessive noise and vibration, and maybe also classed as non serviceable installation.

Piping length and elevation

Capacity		Pipe Size		Standard			Max.	Max.	Additional
Capacity				Length		Elevation		length	Refrigerant
(Btu/h)		Suction	Evap	m(ft)			B m(ft)	A m(ft)	g/m(oz/ft)

30k		5/8"	3/8"	7.5(25)		15(49)		30(98)	30(0.32)

					Outdoor unit
			A
			A
	Indoor unit				B
					B

Outdoor unit

■If an awning is built over the unit to prevent direct sunlight or rain exposure, make sure that heat radiation from the condenser is not restricted.

■Ensure that the space around the back and sides is more than 10cm(3.9in). The front of the unit should have more than 70cm(27.6in) of space.

■Do not place animals and plants in the path of the warm air.

■Take the air conditioner weight into account and select a place where noise and vibration are minimum.

■Select a place so that the warm air and noise from the air conditioner do not disturb neighbors.

More than 60cm(23.6in)

More than

Outdoor unit

Oil trap	A
Oil trap
Indoor unit

In case more than 5m(16.4ft)

CAUTION

•Capacity is based on standard length and maximum allowance length is on the basis of reliability.

•Oil trap should be installed every 5~7meters (16.4~23.0ft).

10cm(3.9in)

	More than	More than
	70cm(27.6in)
		60cm(23.6in)

HMC30AS-1, HMH30BS-1SINGLE-ZONE, HMH30AS-1, HMC30BS-1 specifications

The Heat Controller HMC30AS-1, HMH30AS-1, HMH30BS-1 SINGLE-ZONE, and HMC30BS-1 are cutting-edge HVAC systems designed to provide optimal comfort and efficiency in both residential and commercial settings. These models embody the latest advancements in heating and cooling technology, making them ideal choices for anyone looking to enhance their indoor environment.

One of the standout features of these heat controllers is their energy efficiency. With advanced inverter technology, these products adjust compressor speed based on the heating or cooling demand, significantly reducing energy consumption compared to traditional systems. This not only lowers utility bills but also reduces environmental impact, making them a sustainable choice for eco-conscious consumers.

The HMC30AS-1, HMH30AS-1, HMH30BS-1 SINGLE-ZONE, and HMC30BS-1 also come with programmable thermostats, allowing users to set specific temperature schedules according to their daily routines. This convenience ensures that spaces are always at the desired temperature when occupied, providing a perfect balance between comfort and energy conservation.

Another impressive characteristic is their quiet operation. These systems are engineered with sound-dampening technology, minimizing noise levels and ensuring a peaceful indoor atmosphere. This is especially beneficial for bedrooms, offices, or any spaces where tranquility is essential.

Durability and reliability are also hallmarks of these models. Built with high-quality materials and robust components, they are designed to withstand varying environmental conditions while providing consistent performance. The heat controllers also come with comprehensive warranties, giving users added peace of mind regarding their investment.

In addition to their efficiency and durability, these systems offer versatile installation options. Whether it's a compact single-zone setup or a larger installation, the HMC30 series is adaptable, making it suitable for various building layouts.

With their modern design and user-friendly interfaces, these heat controllers blend seamlessly into contemporary spaces. Smart technology options enable integration with mobile apps and smart home systems, allowing for remote monitoring and adjustment.

From energy-saving features to quiet operation, the Heat Controller HMC30AS-1, HMH30AS-1, HMH30BS-1 SINGLE-ZONE, and HMC30BS-1 represent the pinnacle of heating and cooling solutions, meeting the diverse needs of today's consumers.