D-Link DSM-320 manual Current Wireless Settings

The DSM-320 Setup Wizard (continued)

Current Wireless Settings

Your current wireless settings are displayed based on the SSID you selected in the previous step. If you chose the enter the SSID manually, then the default settings are entered.

SSID

The SSID name selected on the previous screen appears here. You can change the SSID you selected or enter one manually by pressing the ENTER button

on the remote control with this field highlighted. The on-screen keyboard will be displayed and you can enter the SSID.

Mode

There are two different modes to select from: Ad-Hoc and Infrastructure Mode. Ad-Hoc Mode is used for peer to peer wireless networks that do not contain a router or an access point. Infrastructure Mode is used for networks with an access point or router. To toggle between the two, press the ENTER button when Mode is highlighted. The up arrow and down arrow will toggle between the two options. Press ENTER again to select.

WEP

WEP (Wired Equivalent Privacy) is an industry standard encryption technology used by wireless devices. There are five options configurable under this setting, Disable, 64-bit Hex, 128-bit Hex, 64-bit ASCII, and 128-bit ASCII. To toggle between the options, press the ENTER button when WEP is highlighted. The up arrow and down arrow will toggle between the three options. Press ENTER again to select.

Key Index

Select a number between 1 and 4. To toggle between the options, press the ENTER button when Key Index is highlighted. The up arrow and down arrow will toggle between the four. Press ENTER again to select.

Key

To connect to an encrypted wireless device, the key you enter here must match the key of the device exactly. Press the ENTER button on the remote control with this field highlighted to enter a key. The on-screen keyboard will be displayed and you can enter the key.

37