Video (continued)
How to use the ‘Search Video by Time’ feature
In addition to a FF/RWD option (the default mode), your media player also allows you to search a video for a particular time frame. This option is called Jump in the Setup menu. If you want to use the Jump mode, you will need to change the setting of the Video Seek Mode before you view the video.
To set your Video Seek Mode, please follow the steps below before viewing the video:
1.Select SETUP on the remote control unit. Scroll down and select General.
2.Scroll down and press ENTER to select Audio/Video.
3.Scroll down and press ENTER to select Video Seek Mode. There are two options: FF/Rev and Jump. FF/Rev is the default setting. With Jump, you can “jump” to the time you select within the video. In this window, FF/Rev is selected for the Video Seek Mode.
Please select the Video Seek Mode before viewing your video. Once you make this selection, it will apply to all subsequent viewings, until it is changed. You cannot change the setting during video viewing.
4.Jump is selected here in Video Seek Mode. In the next few pages we will explain the Jump setting.
57