Clock/Timer
M I C R O S Y S T E M M C M 1 9 6 D
Setting the clock
1In standby mode, press and hold DISPLAY/ CLOCK (DISPLAY/CLOCK/MENU on the remote control) for 2 seconds.
➜ The clock digits for the hours flash.
2Press TUNING 4 ¢ to set the hours.
3Press DISPLAY/CLOCK again.
➜ The clock digits for the minutes flash.
4Press TUNING 4 ¢ to set the minutes.
5Press DISPLAY/CLOCK to confirm the time.
Note:
– The backlight for clock display is off in standby.
6Press TUNING 4 ¢ to set the minutes.
7Press SLEEP/TIMER to confirm the time. ➜ The timer is now set and activated.
●To deactivate timer, in timer setting mode, press 9.
➜ 
disappears from the display.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off by itself after a set period of time.
● Press SLEEP/TIMER on the remote control once or more.
➜Display shows 
and one
of the sleep time options in sequence: 60, 45, 30,15, 0, 60... if you have selected a time.
●To deactivate, press SLEEP/TIMER on the remote control once or more until “ 0“ is shown, or press STANDBY ON ECO POWER on the system (or 2on the remote control).
➜ 
disappears from the display.
English
Setting the timer
●The system can be used as an alarm clock, whereby the CD,TUNER or iPod is switched on at a set time.The clock time needs to be set first before the timer can be used.
1In standby or active mode, press and hold SLEEP/TIMER on the remote control.
2Press SOURCE (CD, iPod or TUNER on the remote control) to select sound source.
3Press SLEEP/TIMER to confirm your desired mode.
➜ The clock digits for the hours flash.
4Press TUNING 4 ¢ to set the hours.
5Press SLEEP/TIMER again.
➜ The clock digits for the minutes flash.
21