5 Record
The device offers many features that you can use during recording or to improve the quality of a recording. Index marks can be used to mark certain points in a recording as points of reference. Use the timer and the voice activation functions to start a recording automatically. The
5.1 Record settings
Set the required recording quality and microphone sensitivity or select automatic adjustment before you start a recording session. This function allows to customize the settings (recording quality, microphone sensitivity etc.) to suit the recording conditions (see also chapter 9.1.2 Adjust the record settings automatically (DVT3000 – DVT7000), page 40).
You can also enable the wind filter function to reduce the noise produced by the wind if you need to make a recording outdoors (see also chapter 9.1.5 Enable/disable wind filter (DVT3000 – DVT7000), page 42).
When you record in environments with lots of noise in the background (e.g. while in a crowd or during a train or car journey), you can enable the noise reduction function to reduce the background noise (see also chapter 9.1.6 Enable/disable noise reduction (DVT3000
– DVT7000), page 43).
Table of contents
Caution
•Do not remove batteries or rechargeable batteries from the device while it is recording. If you do this, data may be damaged or lost. Device malfunctions may also occur.
1Press the INDEX/A key while the device is stopped to select the desired folder.
XX The following icons will be displayed, depending on the selected location folder: U, V, W, X, Y – internal memory, À, Á, Â, Ã, Ä – memory card displayed.
2Point the
G.
XX The record/play indicator lights red. The recording duration and the remaining recording time are displayed in the selected folder on the display.
3Check the recording level/volume.
4Press G to pause recording.
XX The record/play indicator will blink red.
5Press the G key to resume recording.
6Press the J key to stop recording.
XX The device returns to stop mode.
Record 27