Philips DVT3500, DVT5000, DVT7000, DVT5500, DVT3000, DVT3100, DVT1500 Settings, Set filelocation

9 Settings

Press the MENU key while the device is stopped (start-up screen) to enter the Settings menu.

Note

•Press the J key at the end of an operation to return to the stop mode. Press the J key during the operation to cancel the operation without having to save and return to the stop mode.

9.1 Record settings

9.1.1 Set filelocation

The display shows a folder icon which indicates where the recordings are currently being stored: U, V, W, X, Y – internal memory, À,

Á, Â, Ã, Ä – memory card.

1In stop mode (start-up screen), press MENU.

2Press H / B to select the device settings menu Õ.

3Press + / – to select the Memory select function.

4Press the record key, G, to confirm.

5Press + / – to select if you want to save the files in the internal memory or on the microSD card.

6Press the record key, G, to confirm.

7Press the J key to exit the menu.

Tip

•Press the J key to cancel the operation without saving and return to the stop mode.

9.1.2Adjust the record settings automatically (DVT3000 – DVT7000)

This function allows the device to automatically adjust the record settings (recording quality, microphone sensitivity etc.) to suit the recording conditions.

1In stop mode (start-up screen), press MENU.

2Press the H / B key to select the record settings menu Ó.

3Press + / – to select the Auto Adjust Rec function.

4Press the record key, G, to confirm.

5Press + / – to enable/disable the function.

6Press the record key, G, to confirm.

40 Settings Table of contents