Philips DVT3100, DVT3500, DVT5000 Setting the timer, Enable/disable voice-activated recording

9.1.10 Setting the timer

You can use this function to start a recording at a specified date and time. The device can record from the device’s microphone, the radio or an external sound source.

1In stop mode (start-up screen), press MENU.

2Press the H / B key to select the record settings menu Ó.

3Press + / – to select the Timer function.

4Press the record key, G, to confirm.

5Press + / – to select the Set time function to set the alarm clock.

6Set date and time as described (see also chapter 9.3.1 Set date & time, page 49).

7Press the record key, G, to confirm.

8Press + / – to select the Record source function to set the sound source.

9Press + / – to select if the recording should be made from a microphone, an external source, or a radio station. Select the pre- set station before you record from the FM radio.

10 Press the record key, G, to confirm.

XX If this feature is on, the À icon is displayed. The device will start recording at a specified time.

11 Press + / – to select the Off function to turn off the timer.

Tip

•Press the J key to cancel the operation without saving and return to the stop mode.

9.1.11 Enable/disable voice-activated recording

If voice-activated recording is enabled, recording session will start when you begin speaking. When you stop speaking, the device will automatically pause recording after three seconds of silence, and resume only when you begin speaking again.

Use the voice activation level to set the volume at which the device should begin recording.

1In stop mode (start-up screen), press MENU.

2Press the H / B key to select the record settings menu Ó.

3Press + / – to select the Voice Activation function.

4Press the record key, G, to confirm.

Table of contents Settings 45