Haier AD28NAMBEA(ECO) Is The Unit Installed Correctly, Installation place, Electric work

Page 12
 Is The Unit Installed Correctly

Installation place Is The Unit Installed Correctly

Confirm the following items for safe and comfortable use of air conditioner.

The installation work is to be burden on the sales dealer, and do not conduct it by yourself.

Installation place

Avoid installing the air conditioner

Install the unit at well ventilated

Install the air conditioner firmly on

near the place where possibility of

place.

the foundation that can fully support

inflammable gas leakage exists.

 

 

 

the weight of the unit.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Explosion (Ignition) may occur.

If some obstacle exist, it may cause

If not, it may cause vibration or noise.

 

capacity reduction or noise increase.

 

Select the place so as not to annoy

Snow protection work is necessary

It is advisable not to install the air con-

neighbor with the hot air or noise.

where outdoor unit is blocked up

ditioner at the following special place.

 

by snow.

It may cause malfunction, consult the

 

 

sales dealer when you have to install

 

 

the unit on such a place.

 

 

The place where corrosive gas generates

 

 

(Hot spring area etc.)

 

 

The place where salt breeze blows

 

 

(Seaside etc.)

 

 

The place where dense soot smoke exists

 

 

The place where humidity is extraordina-

 

 

rily high

 

 

The place where near the machine which

 

For details consult your sales dealer.

radiates the electromagnetic wave

 

The place where voltage variation is con-

 

 

siderably large

Electric work

The electric work must be burden on the authorized engineer with qualification for electric work and grounding work, and the work must be conducted in accordance with electric equipment technical standard.

The power source for the unit is to be of exclusive use.

The unit must be grounded.

When you change your address or the installation place

Special technology is required for removal or reinstallation of air conditioner, consult the sales dealer. Besides, construction expense is charged for removal or reinstallation.

For inspection and maintenance

The capacity of air conditioner will decrease by contamination of inside of unit when it is used for about three years although depending upon the circumstances under which it is used, and so in addition to the usual maintenance service, special inspection/maintenance service is necessary. It is recommended to make a maintenance contract (charged) by consulting your sales dealer.

11

Image 12
Contents DUCT TYPE AIR CONDITIONER AD182AMBEAECO AD242AMBEAECO AD28NAMBEAECOAD36NAMBEAECO AD42NAMBEAECO Table of Contents Cautions Safety Instructions and WarningsDisposal of the old air conditioner Safety Precautions CAUTIONS FOR INSTALLATIONCAUTIONS FOR OPERATION Safety Precautions CAUTIONS FOR TRANSFER OR REPAIRSafety Precautions The machine is adaptive in following situationParts and Functions AD182AMBEAECO AD242AMBEAECO AD28NAMBEAECOAD36NAMBEAECO AD42NAMBEAECO Malfunction Unit fails to startCooling or heating is not sufficient Cooling is not sufficientMalfunction The followings are not malfunctionCare and Maintenance CleaningCare and Cleaning of the unit Points to observeFor Preparation of HeatingHot Keep WARMING OPERATIONWhen heating is started When the room thermostat is actuatedIs The Unit Installed Correctly Installation placeFor inspection and maintenance Electric workInstallation Manual For Indoor Unit 1. Safety precautionsInstallation Manual For Indoor Unit Installation Manual For Indoor Unit b Hanger bolts installationAD36NAMBEAECO AD42NAMBEAECOInstallation Manual For Indoor Unit 5 Installation of indoor unitAdjusting to the levelness When the high performance filter is usedInstallation Manual For Indoor Unit 7 Installation work for air outlet ductsABlowout duct 8 Connection of suction, exhaust ducts5. Electric wiring Installation Manual For Indoor Unit2.5mm2 HAIER GROUP