Haier HDU-28H03/H, HDU-24H03/H Is the Unit Installed Correctly, Installation place, Electric work

Page 20

IS THE UNIT INSTALLED CORRECTLY

Confirm the following items for safe and comfortable use of air conditioner.

The installation work is to be burden on the sales dealer, and do not conduct it by yourself.

Installation place

Avoid installing the air conditioner

Install the unit at well ventilated

Install the air conditioner firmly on

near the place where possibility of

place.

the foundation that can fully support

inflammable gas leakage exists.

 

 

 

the weight of the unit.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Explosion (Ignition) may occur.

If some obstacle exist, it may cause

If not, it may cause vibration or noise.

 

capacity reduction or noise increase.

 

Select the place so as not to annoy

Snow protection work is necessary

It is advisable not to install the air con-

neighbor with the hot air or noise.

where outdoor unit is blocked up

ditioner at the following special place.

 

by snow.

It may cause malfunction, consult the

 

 

sales dealer when you have to install

 

 

the unit on such a place.

 

 

The place where corrosive gas generates

 

 

(Hot spring area etc.)

 

 

The place where salt breeze blows

 

 

(Seaside etc.)

 

 

The place where dense soot smoke exists

 

 

The place where humidity is extraordina-

 

 

rily high

 

 

The place where near the machine which

 

For details consult your sales dealer.

radiates the electromagnetic wave

 

The place where voltage variation is con-

 

 

siderably large

Electric work

The electric work must be burden on the authorized engineer with qualification for electric work and grounding work, and the work must be conducted in accordance with electric equipment technical standard.

The power source for the unit is to be of exclusive use.

An earth leakage breaker should be installed.(This is necessary to prevent electric shock.) The unit must be grounded.

When you change your address or the installation place

Special technology is required for removal or reinstallation of air conditioner, consult the sales dealer. Besides, construction expense is charged for removal or reinstallation.

For inspection and maintenance

The capacity of air conditioner will decrease by contamination of inside of unit when it is used for about three years although depending upon the circumstances under which it is used, and so in addition to the usual maintenance service, special inspection/maintenance service is necessary. It is recommended to make a maintenance contract (charged) by consulting your sales dealer.

19

Image 20
Contents Please read this manual carefully before using ManualTable of Contents Disposal of the old air conditioner Safety Precations It could cause such problems as water leakageSafety Precautions Make sure to use a fuse of proper electric ratingMachine is adaptive in following situation Safety PrecautionApplicable ambient temperature range Air outlet Duct Drainpipe Air inlet Parts and FunctionsHDU-24H03/HHDU-42H03/H HDU-28H03/H Buttons and display of the wire controller Remote control Clock setOperation Fan speed selection Select temp. settingRecommendations Press Time Set Clock correctly before starting Timer operationSelect your desired Timer mode on or OFF Press Time button Follow the same procedures in Time setting for Timer onSelect Offon Comfortable Sleep Cooling, dehumidifying modeHeating mode Operation Malfunction Unit fails to startCooling or heating is not sufficient Cooling is not sufficientFollowings are not malfunction Stopped. Because the protecting circuit is activatedDuring this time air conditioner operates in fan Outdoor unit during heating During defrosting operationCare and Maintenance Points to observeWarming Operation Electric work Is the Unit Installed CorrectlyInstallation place Installation Manual for Wire Controller Hint Indoor unit wiringReplace the upper part of wire controller Accessories Selection of the place of installationInstallation of outdoor unit InstallationPiping size Refrigerant pipingOutline piping Model To use vacuum pumpElectric wiring Wire size Switch Leak Rated capacity a Minimum5mm 30mA 0mm 30mATest run Installation Manual for Indoor Unit Safety precautionsChoose installation place Preparation before installation Installation of indoor unit Drain PipingInstallation of air suction and discharging duct Chosen chart of simple duct Shape Square duct Dimension Air volumeExamples of improper installation Air discharging fan Improper exampleOperation method of fan controller Example of the method of choosing capacity numberRefrigerant pipe

HDU-28H03/H, HDU-42H03/H, HDU-24H03/H specifications

Haier has established itself as a leading name in the HVAC sector, and their HDU series, including models HDU-28H03/H, HDU-42H03/H, and HDU-24H03/H, exemplifies the brand's commitment to quality and efficiency. These air conditioning units are ideal for both residential and commercial use, designed to provide optimal comfort without compromising on energy efficiency.

One of the standout features of the HDU series is its advanced inverter technology. This allows the units to adjust their cooling and heating output based on the current demand, ensuring that energy is used efficiently. As a result, users can expect reduced energy bills while enjoying a consistently comfortable indoor climate. The inverter system minimizes temperature fluctuations by maintaining a steady output, enhancing overall comfort.

Another notable aspect of the HDU models is their high energy efficiency ratings, often reaching levels that exceed industry standards. This is largely due to the use of R32 refrigerant, which has a lower global warming potential compared to traditional refrigerants. The incorporation of R32 not only makes these units more environmentally friendly but also helps to improve efficiency, providing effective cooling and heating performance even in extreme weather conditions.

Additionally, the HDU units boast a wide operating temperature range. They are designed to work seamlessly in a variety of climates, maintaining performance in temperatures as low as -15°C for heating and up to 50°C for cooling. This adaptability makes them a versatile choice for different geographic locations.

Quiet operation is another impressive feature of the HDU series. The indoor units are engineered to operate at whisper-quiet levels, making them ideal for bedrooms, offices, or any space where noise could be a concern. This allows users to enjoy a peaceful environment while maintaining their comfort.

The user-friendly interface and smart features of the HDU models further enhance their appeal. Equipped with modern remote controls and optional Wi-Fi connectivity, users can easily manage their air conditioning settings from anywhere, providing convenience and flexibility.

In summary, the Haier HDU-28H03/H, HDU-42H03/H, and HDU-24H03/H models combine advanced inverter technology, high energy efficiency, a wide operating temperature range, and quiet operation to deliver outstanding performance. Their smart features and eco-friendly refrigerant make them a reliable choice for those seeking comfort and efficiency in their HVAC systems.