Using the alarms
Contour 100Di has two alarms which you can set to sound a tone, tune to a radio station or play an track from your iPod/iPhone.
Setting an alarm
Press the Alarm button on the remote to show the status of Alarm 1, press again to show the status of Alarm 2.
Press the Select button to choose and adjust either alarm and press 
or 
and Select to adjust the following settings:
DR
Alarm on/off
Press 
or 
to choose between ‘ON’ (alarm sounds) or ‘OFF’ (alarm does not sound) and press Select.
Time
Set the alarm time. Press 
or 
to adjust the hours then press Select. Repeat to set the minutes then press Select.
DR
ON
DR
Days
Set the days that the alarm sounds. Press 
or 
to choose between: DAILY (every day), ONCE (no repeat), WEEKENDS or WEEKDAYS (Monday to Friday) then press Select.
Type
Press 
or 
to choose between: DIGITAL, FM IPOD or TONE (buzzer).
Station
If you’ve set alarm mode as DIGITAL or FM, press 
or 
to choose between: LAST USED (Last station tuned to) or select a favourite if you have any saved.
Volume
Press 
or 
to change the alarm volume then press Select.
DR
DAILY
DR
DAB
DR
LAST
DR
You see the message ‘SAVED’ once you have completed all the alarm settings.
The 
1 and 
2 icons on the screen indicate when an alarm is set.
DR | 1 |
SAVED
8