Krell Industries iPod Docking Station manual KID Specifications, Papa Dock Specifications

Page 12

Specifications

KID SPECIFICATIONS

Inputs

1 30-pin iPod-device type

1 3-conductor 3.5 mm connector

Audio Outputs

1 pair balanced via XLR connectors

1 pair single-ended via RCA connectors

Video Outputs

1 S-Video via a DIN connector

1 Composite via a RCA connector

Control Inputs

1 RS-232 input via a 9-pin D-subminiature connector

Control Outputs

1 12 VDC trigger output via 2-conductor

3.5mm connectors (500 milliamps maximum per output)

Input impedance

Single-ended: 47.5 k Ohms

Output impedance

Balanced: 50 Ohms

Single-ended: 25 Ohms

Volume Control

256-step Digital Control

Input Overload

Single-ended: 4 Vrms

Output Overload

Balanced: 16 Vrms

Single-ended: 8 Vrms

Frequency Response

20 Hz to 20 kHz +0.7 dB, -0.0 dB

0.1Hz to 90 kHz +0.7, -3 dB

Tone Control Range Bass: +8 dB, -7 dB Treble: +6 dB, -6 dB

Total Harmonic Distortion Plus Noise Balanced Output: <0.002%, 20 Hz to 20 kHz, 4 V RMS or 4 mA rms

Signal-to-noise Ratio

Wideband, Unweighted: >94 dB

“A” Weighted: >97 dB

Power Consumption Standby: 10 W Power on: 25 W

Dimensions

Inches: 13 W x 2.8 H x 10.9 D

Centimeters: 33.0 W x 7.0 H x 27.7 D

Weight

Unit Only: 10 lb., 4.5 kg

Shipped: 14 lb., 6.4 kg

All operational features, functions, specifications, and policies are subject to change without notification.

PAPA DOCK SPECIFICATIONS

Frequency Response

20 Hz to 20 kHz, +0, -0.15 dB <0.2 Hz to 110 kHz,+0 dB, -3 dB

Signal-to-noise Ratio

Wideband, unweighted, referred to full power output:

>108 dB

“A” weighted: >116 dB

Gain: 26.2 dB

Total Harmonic Distortion (THD)

<0.03%@ 1 kHz, at 150 W, 8 Ohms

<0.20%@ 20 kHz, at 150 W, 8 Ohms

Input Impedance 90 kOhms

Input Sensitivity 1.70 Vrms

Output Power, each channel driven: 150 Wrms @ 8 Ohms

300 Wrms @ 4 Ohms

Output voltage

98 V peak-to-peak, 35 Vrms

Output current: 15 A peak

Slew Rate: 50 V/s

Output Impedance <0.073 Ohms at 20 Hz

<0.084 Ohms, 20 Hz to 20 kHz<

Dampening Factor

110 at 20 Hz, referred to 8 Ohms

95, 20 Hz to 20 kHz, referred to 8 Ohms

Power Consumption

Stand-by: 25 W, Idle: 55 W, Maximum: 900 W

Heat Output, BTU/hr.

Stand-by: 85, Idle: 190, Maximum: 1100

Inputs

1 40-pin KID connector

1 RS-232 (to control KID) via a 9-pin D-subminiature connector

Outputs

2 channel via 5-way binding posts

Remote Connectors

One 12 VDC output (12 V trigger), 30 mA maxi- mum, via a 3.5 mm connector

S-Video (from KID) via mini-DIN connector

1 composite video (from KID) via RCA connector

Dimensions

Inches: 17.3 W x 5.7 H x 16.3 D

Centimeters: 43.8 W x 14.5 H x 41.3 D

Weight

Unit Only: 39 lb., 17.6 kg

Shipped: 49 lb., 22.2 kg

Your KID product serial number is:

12 Krell / Papa Dock

P/N 301038 v 08.0

Image 12
Contents Owner’s Reference Krell / Papa Dock Owner’s Reference, vIntroduction Overview1UNPACK the KID Unpack the Papa DockInstall the Battery KID Remote Positioning the components in the listening areaComponent Ventilation Placement Considerations KID / Papa Dock ConnectionPapa Dock requires ventilation clearance To connect the KID to the Papa DockAC Power Guidelines for the KID. Use only Connect to Your SystemConnect the KID to Your System AC Power Guidelines for the Papa Dock. Krell Comm Port RS-232 ConnectorConnect the Papa Dock to Your System Left and Right OutputsInserting the iPod-device Into Dock Connector OperationTOP only Front Panel onlyFront Panel and Remote Remote onlyTOP and Front Panel only KID Specifications Papa Dock Specifications