Insert the
Power LED Color Guides
Operation
FIGURE 4 Inserting the iPod-device Into
the Dock Connector
1
4
POWER | BASS | TREBLE | VOLUME | AUX |
|
|
|
| INPUT |
7 INSERT THE IPOD-DEVICE INTO THE KID DOCK CONNECTOR
When the KID or the Papa Dock are plugged into AC power, connect the
1.Hold the
2.Center the
3.Push down on the top of the
KID Power LED Color Guide. When the KID is plugged into AC power, the power LED illuminates as follows:
Red The KID is in
Blue The KID is on, in the operational mode, in- dicating that an
Purple The KID is on, in the operational mode, and an
Papa Dock Power LED Color Guide. When the Papa Dock is plugged into AC power, the power LED on the front panel illuminates as follows:
Red The Papa Dock is in
mode, when the KID is connected to the Papa Dock and the
OPERATION
8 When the
1.Press the play key (33) on the remote.
2.Adjust the volume (27) using the buttons on the KID front panel or the keys on the remote. Numerical values indicating the volume level appear in the display window.
3.Adjust the bass tone control (25) using the buttons on the KID front panel or the keys on
the remote. Numerical values indicating the bass tone level appear in the display window.
4.Adjust the treble tone control (26) using the but- tons on the KID front panel or the keys on the remote. Numerical values indicating the treble tone level appear in the display window.
5.Press the stop key (34) to end playback.
6.Press the play button or key to begin playback again.
For a complete list of functions, see page 10.
Krell | / Papa Dock 9 |