1UNPACK the KID

Unpacking the KID Unpacking the Papa Dock

One person can remove the KID from its shipping box safely and easily.

1.Open the shipping carton top flap. You see the literature pack containing:

1Owner’s Reference

1Warranty Registration Card

2.Remove the literature pack and the top layer of foam to view:

1KID

1Accessory tray containing: 1 AC power cord

1 KID remote control

1 CR2025 lithium battery

1 iPod-device support(under the accessory tray)

3.Face the front of the shipping box and remove the foam insert containing the AC power cord by pulling the insert straight out of the box.

4.Set the remote and the AC power cord aside, for later use.

5.Insert your hands below the left and right foam inserts surrounding the KID.

6.Lift the KID with the foam inserts straight out of the box.

7.Place the KID on a safe, clean work surface, on its side, resting on a foam insert.

8.Remove the other foam insert.

9.Reposition the KID on the work surface, with the remaining attached foam insert tilted up.

10.Remove the second foam insert.

11.Remove the foam enclosing the component.

12.Place the KID on its feet, right side up, on the work surface. You are now ready to affix the iPod-device support to the chassis.

UNPACK THE PAPA DOCK

One person can remove the Papa Dock from its shipping box safely and easily.

1.Open the shipping carton top flap. You see a protective cardboard sheet.

2.Remove the protective cardboard sheet to view:

1Papa Dock

1Accessory box containing:

1AC power cord

112 VDC (12 V trigger) cable

1T-10 Torx wrench

1Literature pack containing the Owner’s Reference and Warranty Registration Card

3.Remove the accessory box by pulling it straight out of the box.

4.Insert your hands below the left and right foam inserts surrounding the Papa Dock.

5.Lift the Papa Dock with the foam inserts straight out of the box.

6.Place the Papa Dock on a safe, clean work surface, on its side, resting on a foam insert.

7.Remove the other foam insert.

8.Reposition the Papa Dock on the work sur- face, with the remaining attached foam insert tilted up.

9.Remove the second foam insert.

10.Remove the foam wrapper from the component.

12.Position the Papa Dock in the listening area.

ITEMS NOT IN THE SHIPPING BOX. If any of the items listed above are not included in the shipping box, please contact your authorized Krell dealer or distributor.

PACKING MATERIALS. Save all packing materi- als. To ship the KID or the Pap Dock in the future, repack the unit in its original packaging to prevent shipping damage. For more information, see the Return Authorization procedure, in the Service sec- tion of the Krell website at www.krellonline.com.

4 Krell / Papa Dock