JVC NX-HD10 manual Recording the External Component, Start playback on the external equipment

Page 49

Continued

English

To change the information shown in the main display while recording

Each time you press DISP/CHARA on the remote control,

the information in the main display changes as follows:

1

2

4

35

Clock

1Preset station number if any

2 Station frequency

3 Remaining recording time in the HDD, calculated based on the current setting of the recording mode

4 Album number and its track number recorded

5 Recording mode in use

Recording the External Component

You can start recording automatically when the source sound comes into this unit through the LINE IN jacks —Sound Synchronized Recording.

Sound Synchronized Recording will stop automatically if no sound comes in for more than 30 seconds (after making a 30-second silence recording) .

This unit is equipped with the following recording modes to record from the external component.

•AAC128kbps : AAC format is used at the bit rate of 128 kbps.

•AAC 96kbps : AAC format is used at the bit rate of 96 kbps.

1 Press TUNER/LINE repeatedly to select the external component (see page 21).

2 Press REC MODE on the unit repeatedly to select the recording mode.

Current recording

AAC 128

mode setting

 

Ex. When selecting “AAC128kbps”

•Each time you press the button, the recording modes change as follows:

AAC128kbps AAC 96kbps

The indicator corresponding to the selected recording mode lights up on the display.

3 Press REC START.

The REC indicator starts flashing on the display, and the unit now stands by for Sound Synchronized Recording.

REC

REC

indicator

AAC 128

 

Remaining recording time in the HDD*

*Remaining recording time is calculated based on the current setting of the recording mode.

•If playback has already started on the external component, the unit will start recording without entering recording standby mode.

4 Start playback on the external equipment.

Recording starts, and the REC indicator stops flashing and remains lit.

• You can also start recording by pressing HDD 3/8.

5 When playback ends, press 7 to stop recording.

The REC indicator goes off, and the following message appears in the main display.

6 Press LIBRARY to select a library where you store the recording just done.

•Each time you press LIBRARY, the library changes— “Library 1” to “Library 10.”

•If you do not select any library within one minute, “Library 1” is automatically selected.

– 46 –

Page 48 Page 50
Image 49
Page 48 Page 50
Contents LVT0859-001A Compact Component HDD SystemMises en garde, précautions et indications diverses For Canada/pour le Canada For U.S.AIntroduction PrecautionsContents Front Panel Location of the ButtonsInside of Front Door Display Window Become familiar with the buttons on your unitSee pages in the parentheses for details How to open the front doorFront Panel Front door t CD tray Keyboard terminal 9 u Phones jackRemote Control Getting Started Connecting AntennasUnpacking FM antennaYou can connect the speakers using the speaker cords Connecting SpeakersAM antenna To connect an outdoor AM antennaEx. When connecting a cassette deck Connecting Other EquipmentTo remove the speaker grille Speaker grilles are removable as shown belowConnecting a keyboard Putting the Batteries into the Remote ControlRemote control Basic SettingsFront panel Setting the Clock Turning On the PowerChanging the Display Brightness To adjust the clock againChanging the Display Contrast To turn on/off the clock indicationBasic and Common Operations Remote controlTo select the CD player as the source, press CD 3/8 FM AM LineTo stop playback, press For more detailed operations, see pages 23 toAHB 1 AHB AHB OFF canceled Adjusting the Bass and Treble SoundsSource indication canceled Bass TrebleAAC Sound OFF Mono Film canceled Using the AAC SoundsWhat is AAC? Hall MID Night Head PhonesListening to FM and AM Broadcasts To change the FM reception mode Tuning in to a StationTo change the information shown in the main display Tuning in to a Preset Station Presetting StationsTo record a broadcast program automatically Playing Back the External Component Selecting the External Component Adjusting the Input LevelFM AM Changing the Source Name To cancel the setting, press CancelPress SET to finish changing the source name Selected source name appears in the main displayPlaying Back CDs CD/CD-R/CD-RW Playing Back the Entire CD-Normal Play Precautions on CD PlaybackBasic CD Operations To go to another track directly using the number buttonsProgram Play To stop playback for a momentPlaying at Random-Random Play To check the program contentsTo modify the program Prohibiting Disc Ejection-Disc Lock Repeating Tracks or CD-Repeat PlayRepeat 1TRK Repeat OFFMark Playing Back the HDD Hard Disk DriveHow tracks are recorded into the HDD Playing Back the Entire HDD Continuous PlayLibraries Press HDD 3/8To locate a particular point in a track during play Basic HDD OperationsTo select another album Playing Tracks in an Album-Album PlayTo select another library HDD Album HDD LibraryTo go to another track in the same album, press ¢ or Library indicator lights up on the displayTo go to another album in the same library, press Album or Album repeatedlyYou cannot cancel Repeat play during Random play Random and indicators light up on the displayRepeating Tracks-Repeat Play All tracks in the HDD are played repeatedly and endlesslySearching for Albums and Tracks to Play- Search Modes Canceled Last 10? Track title?Album T.? Track T.?Canceled Last 10? Repeat steps 4 1 and 4 2 to enter other characters Available symbols are as followsPress Enter For Album Title SearchPlayed or recorded-LAST To search for one of the last 10 albums recentlyAlbum No.? Recording into the HDD About the digital formats used for recordings Before You Start RecordingHow the HDD separates the recorded tracks? About the maximum recording length for one trackCanceled TU Auto REC Using Automatic Recording FunctionsSmart COMP. CD Auto REC CD and Auto indicators go off CD and Auto indicators light up on the displayCD Auto Recording will be automatically canceled if To automatically record CDs-CD Auto RecordingSmart Comp CD Auto REC CanceledTU Auto REC How Tuner Auto Recording actually works?Recording CDs Press REC Mode on the unit to select the recording modeAAC128kbps AAC 96kbps PCM x1 REC PCM x4 REC PCM x2 REC Prepare a CDPress SET to finish the recording To record a single track during playbackEntry flashes in the main display for a while To stop while recording, pressRecording FM/AM Broadcasts When the broadcast program ends, press 7 to stop recordingAAC128kbps AAC 96kbps To assign track numbers manually while recordingRecording the External Component When playback ends, press 7 to stop recordingStart playback on the external equipment When no sound comes in for more than 30 seconds To record CD into the HDD using analog recording modeTo assign track numbers manually while recording Press CD 3/8, then press 7 after loading a CDHDD Making Your Own TitlesAssigning Titles to Albums and Tracks Canceled Track EDIT?To assign a title to an album TITLE? LIB. EDIT? Album EDIT?On the remote control only Press HDD 3/8 Press TITLE/EDIT again to exit from the title entry modeTo assign titles to tracks First track of the selected album now starts playingEditing the HDD Library Editing Introducing HDD Editing FunctionsAlbum Editing Track EditingLibrary name entry screen appears in the main display Unit enters the library name entry modeCopying an Album-COPY Album Restoring the Libraries-RESTORETITLE? LIB. EDIT? Album EDIT?Making a New Album-MAKE Album Moving an Album-LIB. ChangePress Select ¢or Select 4to select LIB.CHANGE?, then press SETTo make your best album later Erasing an Album-ERASECopying a Track-COPY Track Erasing All Albums-ALL ErasePress Enter again Press SET Press SET againAlbum selection screen appears Press SET when you find the start point POSI.A for CopyCurrently selected track starts playing Playback continuesPlayback stops, and the library selection screen appears Moving a Track-MOVE11Press Enter Press Select ¢or Select 4to select MOVE?, then press SETPress Select ¢or Select 4to select DIVIDE?, then press SET Dividing a Track-DIVIDEIf Cannot Entry LIB. appears in the main display Joining Tracks-JOIN Press SET when you find the dividing pointTo join the divided tracks, see the Join function that Press Select ¢or Select 4to select JOIN?, then press SETPress Select ¢or Select 4to select tracks Erasing a Track-ERASE TRKPress SET Press Enter To divide the joined tracks, see the Divide function onSleep Using the TimersUsing Recording Timer LINE? FM? AM?How Daily Timer actually works Using Daily TimerFM? AM? CD? LINE?* HDD?How Sleep Timer actually works Using Sleep TimerTo turn on the Daily Timer, repeat , and press SET in step 120Timer Priority Using Auto Power OffTo sleep with Sleep Timer and wake up with Daily Timer To deactivate Auto Power Off, press A.P.offSame way as the / buttons on the remote control Using an Optional KeyboardKeys Used for Operating This Unit While selecting a library, used to selectTo assign an album title-F1 Operating Procedures Using the KeyboardTo assign a track title-F2 To search for an album by its number-F5 To change a library name-F3To search for an album by entering its title-F6 To search for a track by entering its title-F7Cleaning the unit MaintenanceGeneral Notes Handling CDsMessages Signification SolutionMessage Cannot How to rebuild the HDDSignification CD playback Symptom TroubleshootingPossible Cause ActionIf Level OVER! appears in the main display HDD recording HDD editingGeneral Symptom Possible Cause Action HDD editingSpecifications Authorized Service Centers Limited Warranty EN, FR JVC 0602NSMMDWJEM

NX-HD10 specifications

The JVC NX-HD10 is a versatile and innovative audio system that combines modern technology with user-friendly features, making it an excellent choice for both casual listeners and audiophiles. This compact yet powerful music system delivers a wide range of functionalities, including CD playback, FM/AM radio, and USB connectivity, allowing users to enjoy their music library in multiple formats.

One of the standout features of the NX-HD10 is its high-quality sound reproduction. Equipped with a powerful amplifier and advanced speaker design, the system is designed to deliver clear, rich audio across various genres of music. The audio performance is further enhanced by the incorporation of JVC’s unique technologies, which optimize sound output and ensure that every note is delivered with precision.

The system boasts a sleek and modern design, making it a stylish addition to any room. Its compact size allows for easy placement on a shelf or tabletop, while the elegant finish adds a touch of sophistication. The user interface is simple and intuitive, featuring a large LCD display that provides clear visibility of the system’s functions and settings.

Connectivity is another highlight of the NX-HD10. In addition to traditional audio sources like CDs and radio, the system supports USB playback, making it easy to play music directly from flash drives or other digital media. This versatility ensures that users can enjoy their favorite tracks without the hassle of complicated setups.

Another key characteristic of the NX-HD10 is its compatibility with Bluetooth technology, enabling wireless streaming from smartphones, tablets, and other Bluetooth-enabled devices. This feature not only adds convenience but also expands the options for music playback, allowing users to create playlists and access streaming services effortlessly.

Moreover, the system includes built-in equalization presets that allow users to customize their listening experience according to their preferences and the type of music being played. This personalization feature ensures that whether it's classical music, rock, or jazz, the NX-HD10 can adapt to provide the best auditory experience.

In conclusion, the JVC NX-HD10 is an impressive audio system that combines aesthetic design with high-quality sound and versatile connectivity options. Its multiple features, including CD playback, Bluetooth streaming, and USB support, make it a practical choice for music lovers seeking an all-in-one solution for their audio needs. With the NX-HD10, JVC continues to demonstrate its commitment to innovation and quality in the world of home audio systems.
Top Page Image Contents