JVC NX-HD10 manual Erasing an Album-ERASE, To make your best album later

2	Press SELECT ¢or SELECT 4to select “MAKE	To make your best album later
		A newly created album has only one track. You can add
	ALBUM?,” then press SET.
		other tracks into this album later using the MOVE function
		(see page 59).

English

The currently selected track number of the current album flashes.

3 Select a track you want to copy to a new album.

1)Press ALBUM + or ALBUM – to select the album.

2)Press SELECT ¢or SELECT 4to select the track.

•You can select the track directly using the number buttons. In this case, the selected track starts playback repeatedly.

Ex. When selecting Album 12, then Track 3

3)Press SET.

The library selection screen appears.

The currently selected library flashes.

4 Press LIBRARY to select a library (“Library 1”— “Library 10”) you want to move the selected album to, then press SET.

The confirmation screen appears in the main display.

Ex. When selecting “Library 10”

5 Press ENTER.

“HDD WRITING” appears and the HDD lamp flashes in red while the editing you have made is being stored in the HDD.

A new album is created (the track selected in step 3 becomes the first track in the new album). Album number is automatically assigned to the newly created album (the youngest unused number will be selected).

•If you have performed the above procedure during play, HDD playback stops.

Erasing an Album—ERASE

You can erase an album one by one.

When an album is erased, the subsequent albums are renumbered automatically.

On the remote control ONLY:

If the HDD includes many albums, select the album number using Search Mode (see page 34) before performing the procedure below.

1 Press TITLE/EDIT repeatedly until “ALBUM EDIT?” appears in the main display, then press SET.

•The source changes to “HDD” automatically if another source has been selected.

2 Press SELECT ¢or SELECT 4to select “ERASE?,” then press SET.

The currently selected album number flashes.

3 Press ALBUM + or ALBUM – to select an album to erase, then press SET.

The confirmation screen appears in the main display.

4 Press ENTER.

“PLEASE WAIT” then “HDD WRITING” appears and the HDD lamp flashes in red while the editing you have made is being stored in the HDD.

•It takes a long time if the selected album has many tracks.

•If you have performed the above procedure during play, HDD playback stops.

– 56 –