Control four JVC VCRs
The remote control is capable of controlling two JVC VCRs independently; one set to respond to your remote control’s A code control signals and the other set to respond to B, C, D code control signals. The remote control is preset to send A code signals because your DVD/VCR is initially set to respond to A code signals. You can easily modify your DVD/ VCR to respond to the other code signals.
Preparation:
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
1 Press and hold VCR on the remote control until you finish the step 2.
2 Press one of the following buttons to enter the desired code, then press ENTER.
1:sets the remote control code to “A”
2:sets the remote control code to “b”
3:sets the remote control code to “C”
4:sets the remote control code to “d”
3 To turn off the unit, press POWER on the front panel.
4 Press PLAY on the front panel for 5 seconds. The current setting code of the unit appears on the display.
5 Press STOP on the remote control. The new code is transmit- ted to the unit and blinks for about 4 seconds on the display, then the clock time appears.
6 Press POWER on the remote control. When the unit is turned on, the setting is complete. If the unit is NOT turned on, repeat from step 1.
POWER
PLAY
13