Playback connections
Connect to a Stereo Amplifier with Audio Output
| AUDIO/VIDEO cable (supplied) | To Audio/Video Input |
DVD/VCR | To Audio/Video Output |
|
| Stereo Amplifier |
|
| Y |
|
| PB/CB |
|
| PR/CR |
|
Audio (L) Output Audio (R) Output
To Audio (L) Input
TV
To Audio (R) Input
AUDIO cable (not supplied)
Connect to an AV Amplifier with built-in digital surround
If you are using an Amplifier with a
Use this connection to connect an:
•AV amplifier with
•AV amplifier with
Coaxial Digital Audio Output | Video cable (not supplied) | To Video | |
| |||
DVD/VCR |
| ||
Video Output | Input | ||
| |||
|
| ||
Y |
| TV | |
|
| ||
PB/CB |
|
| |
PR/CR |
|
|
| AV Amplifier with |
Coaxial digital cable | |
decoder as above | |
(not supplied) |
|
NOTE:
You may connect to a TV with a Component video cable (not supplied) or
Connecting the optical digital cable
You may connect to an AV Amplifier with an Optical digital cable (not supplied) instead of a Coaxial digital cable.
When you connect the optical digital cable (not supplied), remove the dust protection cap from the rear panel. When not using the optical digital cable, attach the dust protection cap to protect against dust.
NOTES:
•The OPTICAL, COAXIAL, AUDIO L/R,
•When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL or DTS to ON on the AV Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the speakers to be damaged.
•Caution for the optical digital audio output connector: Do not connect to an amplifier (with an optical digital input connector) which does not contain a Dolby Digital or DTS decoder. Otherwise, any attempt to play DVDs may cause such a high level of noise that it may be harmful to your ears and damage your speakers.
•DTS audio will be output only from the COAXIAL or OPTICAL output. To hear DTS audio,
•When playing
•Some DTS decoders which do not support
19