JVC HR-XVC20U manual Manual clock setting, To make corrections any time during the process

Manual clock setting

You must set the date and time manually for timer recordings and Daylight Saving Time if the Auto Clock process did not set them correctly.

NOTE:

After a power failure or disconnection of the power, the timer settings will be lost. In this case, reset the present time.

Preparation:

•Turn ON the TV and set to the video input mode.

•Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then press VCR to select the VCR mode. (The VCR indicator will light.)

EXAMPLE: Setting the clock to "8:30 AM" March, 26 (WED), 2003.

1 Press SET UP MENU. The VCR menu screen will appear.
2 Press	or	to select the		TIMERMENURECSET
“SYSTEM SETUP” menu, then				AUTOAPREEAT			ONOFF
press	ENTER.
				CHSETUP
				SYSTEMSETUP
			·	+/–/ENTER/MENUÒ
3 Press	or	to select the	SYSTEMCLOCKSETUP
“CLOCK SET” option, then press				LANGUAGE/IDIOMA/LAGUE
ENTER.				AUTONONOISECLOCKBACKGROUONOFFND
				DAYLIGHTSTANDARDSAVINGTIMETIME
			·
4 Press	or	to set the month,		+/–/ENTER/MENUMONTH		3Ò
then press ENTER button.				YEARDAY	2001(S3AT)
				TIME	12:00AM
			·+/–/ENTER/CANCEL/MENUÒ

To make corrections any time during the process
Press CANCEL repeatedly until the item you want to change
blinks, then press	or .	YEARDAY	20036(WED)
5 Set the day, year and time as in		TIME	8:30AM
step 4.		·+/–/ENTER/CANCEL/MENUÒ
		MONTH
6 After setting the clock, date and		8:30AMWED
time starts functioning

automatically.

25