JVC HR-XVC20U manual Zooming/Locating desired scene

Zooming/Locating desired scene

NOTES:

•You can use the Pause, Slow, Search or Skip feature in the zoom mode.

•In case of the Video-CD playback with PBC, the SEARCH MODE does not work.

Preparation:

•Turn ON the TV and set it to the video input mode.

•Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then press DVD to select the DVD mode. (The DVD indicator will light.)

Zooming

This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame.

1 Press ZOOM during playback.	1
The center part of the image will

be zoomed in.

Each press of ZOOM will change the ZOOM 1 (x 1.3), 2 (x

1.5) and	3 (x 2.0).
2 Press /	or / to view a different part of the frame.

You may move the frame from the center position to UP, DOWN, LEFT or RIGHT direction.

3 In the zoom mode press ZOOM repeatedly to return to a 1:1

view ( Off).

Locating desired scene

Use the title, chapter and time recorded on the disc to locate the desired point to play back.

To check the title, chapter and time, press OSDC(seehapterpage 58).

1 Press SEARCH MODE during /Enter/0Title9/Cancel/Jump

playback or stop mode.

2 Press or to select the “Time”, “Title” or “Chapter”.

3 Press Number keys to change the number.

•If you input a wrong number, press CANCEL.

•Refer to the package supplied with the disc to check the numbers.

4 Press ENTER. Playback starts.

•When you change the title, playback starts from Chapter 1 of the selected title.

•Some discs may not work in the above operation.

41