Auto clock setting
Daylight Saving Time setting
You can set the Daylight Saving Time automatically or manually.
Preparation:
•Turn ON the TV.
•When a TV is connected with an audio/video cable, select the
video input mode on the TV.
• When a TV is connected only with an antenna cable, set to the video channel 3 or 4. Then select VCR position with TV/VCR.
•Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then press VCR to select the VCR mode. (The VCR indicator will light.)
1 Repeat the step 1 on page 23
and press or to select
“DAYLIGHT SAVING TIME”, then press ENTER.
2 Press or to select one of the options, then press ENTER.
ON: for manual setting (forward one hour)
OFF: for manual setting (back one hour)
AUTO: for automatic setting (read XDS in the signal)
SYSTEMDAYLIGHTSAVINGSTANDARDAUTOLANGUAGE/IDIOMA/LAGUENOCLOCKNOISECLOCKSETUPBACKGROUNDTIMEONOFFTIME
When you want to set the Daylight Saving Time manually, on the first Sunday in April you set to “ON”, and on the last Sunday in October you set to “OFF”.
3 Press SET UP MENU until the menu screen is cleared.
NOTES:
•When shipped from factory, the DAYLIGHT SAVING TIME option is set to “AUTO” position.
•When the clock is not set, Daylight Saving Time setting is not available.
•When there is no Daylight Saving Time in your area, always select “OFF” position in step 2.
24