Timer-recording
Timer recording special case
Weekly (e.g.
Follow the procedure of timer recording on the previous page. At picture 3 press SET + or – repeatedly until the desired setting appears. Then press ENTER.
When you press SET – repeatedly, the indicator at DATE will change as follows, in this case the today is Friday.
The current day (Friday)
One month later | ||
| ||
minus one day | ||
(Weekly | ||
STARTENDCH | ||
·+/–/ENTER/CANCEL/MENUÒ
In case timer programs-overlap
•Do not overlap timer programs as portions of the conflicting programs will be lost. The first recording time has priority over the next recording time as shown in the diagram below.
| 8 : 00 | 9 : 00 | 10 : 00 | 11 : 00 |
Program 1 |
|
|
|
|
Program 2 |
|
|
|
|
|
| Deleted Parts |
| |
Program 3 |
|
|
|
|
|
| Non Recorded Portion Parts |
| |
Recording | Prog.1 |
| Prog.2 | Prog.3 |
Control Settings |
|
|
|
|
NOTES:
•The daily/weekly recording can be made continu- ously until the recording is canceled or the tape reaches the end.
•During timer recording the automatic rewinding mechanism does not function.
Confirmation / Cancellation of the timer recording
1 If the timer has been activated, press TIMER to deactivate the timer. The clock symbol () will disappear. Then press VCR to change to VCR mode.
2 To confirm timer program:
At picture 1 on the |
| |
Then the timer program |
| |
previous page select the |
|
|
“TIMER REC SET” option |
|
|
and press ENTER. |
|
|
list as right will appear on |
|
|
the screen. | DATE STARTENDCH |
|
3 Press SET + or – to |
| |
To cancel timer program: | – | |
CANCEL to cancel the | ||
program. |
|
|
select the unnecessary |
|
|
program, then press |
|
|
4 Press SET UP MENU repeatedly until the
NOTES:
•If there are other timer record programs remaining, TIMER must be pressed to reactivate the timer, otherwise the remaining timer record programs will be ignored.
•You cannot confirm the timer program during timer recording operation.
•You can also correct the programmed setting in
program confirm mode.
At step 2 above, press ENTER to enter the program input mode. Then press ENTER repeatedly until the item you wish to correct
blinks. Then correct the data with SET + or
Then press SET UP MENU repeatedly until the TV- picture appears.
34