Haier HSU-18CK13(T3) operation manual Maintenance

Page 17

Maintenance

Different models have different appearance

Cleaning of unit casing

Cleaning of remote controller

Cleaning of air filter

Cut off power supply before cleaning unit casing with soft cloth.

In case of heavy stain, clean it with neutral detergent. squeeze water in the cloth, wipe off the detergent on unit casing completely.

Don't use water to wash unit casing, please use dry cloth. Don't use glass cleaner or cloth soaked with chemicals.

Air Filter

1.Open inlet grille by pulling it upward.

3.Clean the filter Use a vacuum

cleaner to remove dust,or wash the

filter with water. After washing, dry the filter

completely in the shade.

5.Close the inlet grille.

2.Remove air filter

Push up the filter's center tab slightly until it is caesura of the stopper. Remove it by pulling down.

4.Attach the filter Attach filter behind the stopper so that

the "Front" indication is facing to the front. Make sure that it is completely behind the stopper, otherwise problems might occur.

16

Image 17
Contents Split Type Room AIR Conditioner Disposal of the old air conditioner Refrigerating circuit is leak-proof SpecificationsMachine is adaptive in following situation Applicable ambient temperature rangeIndoor Unit Parts and FunctionsHints Buttons and display of the remote controllerClock set HI Auto Remote controllers operation Power failure resumeplease set and apply as necessaryEnjoy yourself by just a gentle press Select operation modeUnit start FANFan speed selection Select temp. settingCOOL,HEAT and DRY operation Left and right air flow adjustment manual Air flow direction adjustmentTo cancel Timer mode Timer OperationTo cancel Timer mode Brief Introduction to Health Operation Health Mode operationEmergency operation Emergency and Test OperationTest operation Removal of the restriction of emergency or test operationHeat mode Cool modePower Failure Resume Function OperationMaintenance Never fail to observe the followings MaintenanceBefore asking for service, check the following first Trouble shooting