Parts and Functions
Buttons and display of the remote controller.
If the unit which you purchased has not health function, remote controller should like the following figure:
25. SET
Used to confirm timer and clock settings 26. HOUR
Used to set clock and timer settings 27.LOCK
Used to lock buttons and LCD display.
1.Mode display
AUTO 
COOL 
DRY
HEAT FAN
HI AUTO
2. SWING display
3. FAN SPEED display
4.HEALTH display
5.SLEEP display
6.LOCK display
7.TIMER ON display
8.AUXILIARY HEAT display
9.SWING
10.MODE
Used to select AUTO,COOL and FAN
11. CLOCK
Used to set correct time 12. TIMER
Used to select TIMER ON,TIMER OFF 13. RESET
Used to reset the controller back to normal condition.
14. CODE
Used to select code A or B with a press,A or B will be displayed on LCD.please select A without special explanation
15.CODE display
16.SIGNAL SENDING display
17.POWER/SOFT display
18.TEMP. display
19.CLOCK display
20.TIMER OFF display
21.TEMP
Used to select your desired temperature 22. FAN
Used to select fan speed
23.POWER ON/OFF Used for unit start or stop
24.SLEEP
Used to select sleep mode
NOTE:(1)The following functions and related displays are not available: AUXILIARY HEAT display, POWER/SOFT display,HEALTH display. (2)If the Air conditioner don't have the function of the code ,press code B can cause it not available.
(3)Cooling only unit do not have functions and displays related with heating.
Clock set
When unit is started for the first time and after replacing batteries in remote controller, clock should be adjusted as follows:
Press CLOCK button, "AM" or "PM" flashes.
Press 
or
to set correct time. Each press will increase or decrease 1min. If the button is kept depressed, time will change quickly.
After time setting is confirmed, press SET, "AM "and "PM" stop flashing, while clock starts working.
Hints
After replacing with new batteries, remote controller will conduct
6