Operation
Auto run, Fan operation | Enjoy yourself by just a gentle press. |
(1) Unit start
Press ON/OFF button, unit starts.
Previous operation status appears on display. (Not Timer setting)
Power indicator on indoor unit lights up.
(2) Select operation mode
Press MODE button. For each press, operation mode changes as follows:
AUTO COOL DRY HEAT FAN
Unit will run in selected mode.
Stop display at " 
" AUTO or " 
"FAN.
(3) FAN
Press FAN button. For each press, fan speed changes as follows:
LO | MED | HI | AUTO |
Unit will run at selected fan speed.
Note:AUTO is not available in FAN mode.
(4) Unit stop
Press ON/OFF button. Only time remains on LCD.
All indicators on indoor unit go out. Vertical flap closed automatically.
Hints
Remote controller can memorize settings in each operation mode. To run it next time just select the operation mode and it will start with the previous setting.
No reselecting is needed.(TIMER ON/OFF needs reselecting)
Cautions: | Note: |
On cooling only unit, heating mode is not available, | The above information is the |
After replacing batteries, press ON/OFF, and display | explanation of the displayed |
becomes as follows: | information therefore varies |
Operation mode: AUTO, Temp. No | with those displayed in actual |
Timer mode: No, Fan speed :AUTO | operation. |
8