Haier HSU-18CK13(T3) Trouble shooting, Before asking for service, check the following first

Page 19

Trouble shooting

Before asking for service, check the following first.

Phenomenon

Cause or check points

The system does not restart

When unit is stopped, it won't restart

immediately.

immediately until 3 minutes have elapsed

 

to protect the system.

 

When the electric plug is pulled out and

 

reinserted, the protection circuit will work

 

for 3 minutes to protect the air conditioner.

 

During unit operation or at stop, a swishing

 

or gurgling noise may be heard. At first 2-3

Noise is heard

minutes after unit start, this noise is more

 

noticeable. (This noise is generated by

 

refrigerant flowing in the system.)

Normal

During unit operation, a cracking noise may

Performance

be heard. This noise is generated by the

inspection

casing expanding or shrinking because of

temperature changes

 

 

Should there be a big noise from air flow in

 

unit operation, air filter may be too dirty.

Smells are generated.

This is because the system circulates smells

from the interior air such as the smell of

 

furniture, cigarettes.

Mist or steam are blown out.

During COOL or DRY operation, indoor unit

 

may blow out mist. This is due to the sudden

 

cooling of indoor air.

Does not work at all.

Is power plug inserted?

Multiple

Is there a power failure?

check

Is fuse blown out?

Poor cooling

Is the air filter dirty? Normally it should be

cleaned every 15 days.

 

 

Are there any obstacles before inlet and outlet?

 

Is temperature set correctly?

 

Are there some doors or windows left open?

 

Is there any direct sunlight through the

 

window during the cooling operation?(Use

 

curtain)

 

Are there too much heat sources or too many

 

people in the room during cooling operation?

Application temp. range of air conditioner -7oC~43oC.

18

Image 19
Contents Split Type Room AIR Conditioner Disposal of the old air conditioner Refrigerating circuit is leak-proof SpecificationsMachine is adaptive in following situation Applicable ambient temperature rangeIndoor Unit Parts and FunctionsClock set Buttons and display of the remote controllerHints HI Auto Remote controllers operation Power failure resumeplease set and apply as necessaryFAN Select operation modeEnjoy yourself by just a gentle press Unit startCOOL,HEAT and DRY operation Select temp. settingFan speed selection Left and right air flow adjustment manual Air flow direction adjustmentTo cancel Timer mode Timer OperationTo cancel Timer mode Brief Introduction to Health Operation Health Mode operationRemoval of the restriction of emergency or test operation Emergency and Test OperationEmergency operation Test operationOperation Cool modeHeat mode Power Failure Resume FunctionMaintenance Never fail to observe the followings MaintenanceBefore asking for service, check the following first Trouble shooting