TOA Electronics SR-A18B, SR-A12SWP, SR-RF12Wp, SR-A12LWP, SR-TP12 operating instructions

Page 16

9.5. Notes on Flying

WARNING

Check to confirm that the suspension wires, belts, construction of the ceiling, etc are strong enough to withstand the speaker load.

Tighten each joint bolt to 300-350 kg·cm of torque securely.Be sure to use the joint bolts supplied with the speaker and the Rigging Frame.

Up to 8 Line Array speakers can be arranged in flying configuration per one Rigging Frame. The Subwoofer is counted as 1.5 pieces. No more than 8 speakers can be arranged in flying configuration.

Fly the assembled system vertically from at least at two points on the left and right sides.

Use a suspension point that provides the desired downward angle. The downward angle increases

as the suspension point is moved backward.

Center of gravity position

Add anti-swing guy wires as needed. Take care not

to apply the enclosure’s weight on the guy wires.

Anti-swing guy wires

16

Image 16
Contents Tilt Joint Plate Operating InstructionsTable of Contents StackingSafety Precautions Safety Symbol and Message ConventionsPage Features DimensionsGeneral Description SR-A12LSR-A12S SR-A18BSR-A12SWP SR-A12LWPUnit mm SR-RF12, SR-RF12WP SR-TP12Input Connectors SR-A12L, SR-A12S and SR-A18B for Indoor useSR-A12L, SR-A12S SR-A12LWP and SR-A12SWP for outdoor useInternal Wiring Diagram System using the SR-A12L, SR-A12S, SR-A12LWP or SR-A12SWPConnections SR-A12LWP, SR-A12SWPDigital Processor Settings General Description FlyingSR-A12LWP SR-A12SWP SR-RF12WP Rigging Frame assembly High box assembly diagram Subwoofer assembly diagram High box finished assembly diagramSubwoofer finished assembly diagram Joining the Enclosure to the Rigging FrameJoining Enclosures Page Page SR-RF12 Rigging Frame assembly Assembly diagramWhen attaching the Mounting Plates to the center positions When attaching the Mounting Plates forward positionsSubwooter finished assembly diagram Mounting the Enclosure to the Rigging FrameTypical stacking example Forbidden stacking exampleTilting the Enclosure Downward Joined view with sub-wooferJoined view with rigging frame SR-TP12 Tilt Joint PlateSR-A18B x1, SR-A12S x1, SR-A12L SR-A12S x1, SR-A12LSpecifications SR-A12LWP SR-A12SWPSR-A18B