9.4. Joining Enclosures
Use the supplied Joint Plate to join the enclosures by way of the enclosure's flying plate. As shown in the figure, mount a Joint Plate securely to the upper enclosure's lower left side, using 4 supplied bolts with plain washers and spring washers. Similarly, attach another Joint Plate to the lower enclosure's upper right side.
Joint Plate | Joint Plate |
Join the enclosures securely, using 4 supplied bolts with plain washers and spring washers on each side. Because the Joint Plate has holes to be used for setting the overlapping angle, use the holes that provide the desired overlapping angle. The overlapping angle can be set to between 0 and 5 degrees in
Enclosure opening angle: 0 degree
Joint Plate
Enclosure opening angle: 5 degrees
Overlapping angle: 5 degrees
Overlapping angle: 0 degree
15