Tilting the Enclosure Downward | TOA Electronics SR-A12LWP, SR-RF12

10.6. Tilting the Enclosure Downward

The lower Line Array speaker, excluding the subwoofer, can be tilted downward with the addition of SR-TP12 Tilt Joint Plates. SR-TP12 Tilt Joint Plates make it possible to set wider angles than can be achieved using the supplied Joint Plates. Replace the lowermost Line Array speaker’s Joint Plates with the Tilt Joint Plates, then assemble the system.

Joined view with sub-woofer

Tilt angle (Vertical facing angle) can be adjusted in the range of 0 degree to 15 degrees.

Joined view with rigging frame

Tilt angle (Vertical facing angle) can be adjusted in the range of 10 degrees to 15 degrees.

Tilt joint plate

For assembling, refer to the previous “10-3. Mounting the Enclosure to the Rigging Frame” when joining to the rigging frame, and “9 Flying, 9-4. Joining Enclosures” when joining to the sub-woofer.

For precautions when stacking, refer to the previous “10-5, Notes on Stacking”.

SR-TP12 Tilt Joint Plate

Tilt angle (Vertical facing angle) table

	When using the supplied	When using the optional tilt
	joint plate	joint plate

When joining the joint plate	0 – 5 degrees	10 degrees – 15 degrees
with rigging frame	in 1 degree units	in 1 degree units

When joining the joint plate	Same as above	0 degree – 15 degrees
with sub-woofer	Same as above	in 1 degree units
with sub-woofer		in 1 degree units