TOA Electronics SR-A12SWP, SR-A18B, SR-RF12Wp, SR-A12LWP, SR-TP12 Digital Processor Settings

8. DIGITAL PROCESSOR SETTINGS

Recommended setting parameters are as follows.

System using the SR-A12L, SR-A12S, SR-A12LWP or SR-A12SWP

Channel	Gain	Polarity		Filter			Delay
	(dB)		TYPE	Freq. (Hz)	Gain (dB)	Q	(msec)
LOW	0	Normal	HPF (12 dB)	40		0.900	0.708
			LPF (12 dB)	1.0k		0.707
			LPF (12 dB)	1.0k		0.707
			PEQ	300	-5.0	2.549
			PEQ	530	-4.5	2.549
HIGH	0	Inverse	HPF (12 dB)	1.2k		0.707	0
			PEQ	2.5k	-10.0	1.011
			PEQ	5.0k	-2.0	1.414
			PEQ	14.0k	9.0	1.160

System which combines the SR-A12L or SR-A12S with the SR-A18B

Channel	Gain	Polarity		Filter				Delay
	(dB)		TYPE	Freq. (Hz)	Gain (dB)	Q		(msec)
S-LOW	3.0*	Inverse	LPF (12 dB)	90		0.707	0.708
			LPF (12 dB)	200		1.000
			HPF (12 dB)	20		0.707
			HPF (12 dB)	35		1.505
			PEQ	34.5	6.0	1.800
LOW	0	Normal	HPF (12 dB)	77.5		0.900	0.708
			LPF (12 dB)	1.0k		0.707
			LPF (12 dB)	1.0k		0.707
			PEQ	300	-5.0	2.549
			PEQ	530	-4.5	2.549
HIGH	0	Inverse	HPF (12 dB)	1.2k		0.707	0
			PEQ	2.5k	-10.0	1.011
			PEQ	5.0k	-2.0	1.414
			PEQ	14.0k	9.0	1.160

* The Gain on the S-LOW channel needs to be adjusted depending on the system configuration.

11