TOA Electronics SR-RF12Wp, SR-A12S, SR-A18B Typical stacking example, Forbidden stacking example

10.4. Joining Enclosures

For joining enclosures, refer to “9 Flying, 9-4. Joining Enclosures”.

10.5. Notes on Stacking

•Prepare casters and caster mounting bolts separately, as the Rigging Frame’s leg.

•When stacked, the Line Array speaker’s front or rear deviation from the Rigging Frame must be within 10cm. Also, whenever possible, select mounting plate positions that allow the system’s center of gravity to be situated near the center of the Rigging Frame.

• Tighten each joint bolt to 300-350 kg·cm of torque securely.Be sure to use the bolts supplied with the speaker and the Rigging Frame.

WARNING	• Up to 5.5 speakers can be stacked, counting each Line Array speaker
	as 1 piece and each SR-A18B Subwoofer as 1.5 pieces. No more
	than 5.5 pieces can be stacked.
Typical stacking example

The Line Array speaker's front or rear deviation from the Rigging Frame must be within 10cm.

Forbidden stacking example

10cm or more

20