Peavey 500 manual Architectural and Engineering Specifications

Page 12

Architectural and Engineering Specifications

The powered loudspeaker system shall have a frequency response from 45 Hz to 150 Hz. The peak SPL with inaudible distortion shall reach 124 dB with music as a source, when measured at a distance of 1M and driven to full output capacity. The system shall utilize a 15" Black Widow® woofer.

The powered subwoofer system shall have a group of high impedance input connectors consisting of one 1/4" RTS phone jack, one male XLR and one combo female XLR and 1/4" RTS phone jack, on the rear panel, all connected in parallel. A volume control will be located next to the input jack group. A balanced high pass filtered output shall be provided, with one female XLR and one 1/4" RTS phone jack provided.

The system power amplifiers shall have an unfiltered frequency response of 10 Hz to 30 kHz which deviates no more than +0, -1 dB up to rated power, a damping factor greater than 100

@1 kHz into 8 ohms, hum and noise better than 95 dB below rated power, and typical THD and IMD of less than 0.2%. The amplifier shall be capable of 300W into an 8 ohm nominal load, and shall incorporate DDT™ compression.

The input signal shall be electronically divided into high frequencies and low frequencies by a staggered pole third order slope line level crossover at 150 Hz. The low frequencies shall be processed to provide bass boost, subsonic filtering and overall response shaping, and the high frequencies shall be made available via an external output.

The enclosure shall be constructed of injection-molded polypropylene of 1/4" nominal thickness with a UL flame rating, and reinforcing ribs internally. A handgrip shall be molded in on each side of the woofer and on the top rear edge.

A vinyl coated perforated metal grille shall be provided for woofer protection. The cabinet shall incorporate four tall sturdy rubber feet for floor standing use, and four mounting point inserts on the top and bottom each for flying use.

The outside dimensions shall be 28 9/16" tall by 21 5/16" wide by 17" deep, and the weight shall be 62 lbs. Power requirements shall be: 500 watts, 120VAC, 60 Hz Domestic and

240 VAC, 50 Hz (European). The loudspeaker system shall be called a Peavey Impulse 500P Subwoofer.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Impulse 500P PRECAUCIONRiesgo de corrientazo No abra IEC Power Cord Connection ON-OFF SwitchPower LED Impulse 500P SUBOperating Instructions InputsLevel High Pass Filtered OutputsGetting AC Power to the Impulse 500P Subwoofer Getting a Signal to the Impulse 500P SubwooferUSE of the Impulse 500P Subwoofer USE of a StandVolume Control Adjustment USE of Multiple Impulse 500P SUBWOOFER’STroubleshooting USE with Impulse 500P and a MicrophoneApplications No output at allHum or Buzz Distorted or Fuzzy SoundDescription Page Impulse 500P SUB Specifications Subject to change without noticeArchitectural and Engineering Specifications Impulse 500P SUB Graphs Amplitude Response 1W 1m On-AxisHarmonic Distortion at 100 dB SUB Impulse 500P Subwoofer Descripción DEL Panel TraseroFusible LED DE PoderInstrucciones DE USO EntradasNivel Salidas DE Agudos FiltradosUSO DEL Subwoofer Impulse 500P USO DE UN AtrilLlevar Señal AL Subwoofer Impulse 500P Ajustes DEL Control DE Volumen Salidas DE Filtro DE AgudosResplución DE Problemas USO DE Impulse 500P Y UN MicrófonoAplicaciones No hay señal de salidaRuidos de hum o buzz Despcipción Page Especificaciones Subwoofer Impulse 500P Especificaciones Arquitectónicas y de Ingeniería Geräterückseite SicherungBedienungshinweise Einsatz DES Impulse 500P Subwoofers Anschluss DES Impulse 500P Subwoofers AN DAS StromnetzVerwendung Eines Hochständers Anschlussmöglichkeiten DES Impulse 500P Subwoofers Einstellung DER LautstärkeEinsatz Mehrerer Impulse 500P Subwoofer Erste Problemlösungen Impulse 500P-SYSTEM MIT Einem MikrofonEinsatzgebiete Es kommt kein TonRauschen oder Brummen Verzerrter KlangWartung Sonneneinstrahlung/HitzeReinigung OptikFlugpunkte maximale Aufnahmetiefe Hardware-KontrolleBeschreibung Specifications DU Impulse 500P Subwoofer FrequenzweicheDeutsch Bedienungshinweise Einsatz DES Impulse 500P Subwoofers Anschlussmöglichkeiten DES Impulse 500P Subwoofers HOCHPASS-AUSGÄNGE Erste Problemlösungen Rauschen oder Brummen Wartung Beschreibung Technische Daten Verstärker Technische Daten Konzept und Technische Umsetzung Important Safety Instructions Peavey Electronics Corporation Limited Warranty 80304738
Related manuals
Manual 32 pages 6.36 Kb

500 specifications

The Peavey 500 is a powerful and versatile amplifier that has garnered praise from musicians and audio engineers alike. Known for its robust performance and reliability, the Peavey 500 is designed for a variety of applications, including live performances, studio recordings, and worship settings. With a blend of innovative technologies and practical features, this amplifier stands out in the crowded market of pro audio equipment.

One of the key features of the Peavey 500 is its impressive power output. Offering substantial wattage, this amplifier is capable of driving even the most demanding speaker systems with ease. Competitively designed to handle both high and low frequencies, it ensures clarity and fullness of sound, making it an excellent choice for bassists and guitarists who require punchy, dynamic tones.

The Peavey 500 incorporates several exclusive technologies to enhance its performance. One such innovation is Peavey’s proprietary TransTube technology, which emulates the warm, harmonic-rich tones of vacuum tube amplifiers. This allows musicians to achieve a rich and vibrant sound without carrying the weight and maintenance demands of traditional tube amps.

In addition to its sound quality, the Peavey 500 is equipped with built-in EQ controls, allowing users to tailor their sound to suit different performance environments. Its comprehensive tone-shaping capabilities include bass boost, midrange adjustments, and treble controls, enabling precise sound customization. This flexibility is crucial for musicians who often perform in varied acoustic spaces.

Durability is another hallmark of the Peavey brand, and the Peavey 500 is no exception. Engineered with high-quality components and a rugged construction, this amplifier is built to endure the rigors of frequent transportation and heavy use. From the solid chassis to the robust input and output connectors, every aspect of the Peavey 500 reflects a commitment to long-lasting performance.

Furthermore, the amplifier features multiple input options, including standard quarter-inch jacks and XLR connections, ensuring compatibility with a wide range of instruments and audio sources. The versatility of the Peavey 500 is further enhanced by options for direct outputs, making it easy to connect to recording systems or external mixers.

Overall, the Peavey 500 stands as a testament to Peavey’s dedication to quality and innovation in the music industry. With its powerful output, advanced technologies, and user-friendly features, it continues to be a go-to choice for musicians seeking reliability and exceptional sound in their performances. Whether on stage or in the studio, the Peavey 500 delivers the performance that professionals expect and deserve.
Top Page Image Contents