Altitude 300-2™ Wireless Port Introduction
WARNING!
The Altitude 300-2™is not secured to the bracket unless a padlock is used. If a padlock is not used the unit should be secured to the bracket by a cable tie through the lock hasp to keep it from falling. Failure to secure the unit is hazardous.
•One computer lock cable for securing the Altitude 300-2™when the universal mounting bracket is not used.
•Box hanger for installing the Altitude 300-2™above the tiles of a suspended ceiling.
•External antenna(s) for the Altitude 300-2d™. Extreme Networks' external antennas can be ordered separately.
Software Description
The Altitude 300-2™receives its software and configuration from the Summit 300™ switch. A description of the software and the wireless port's configuration is in the Summit 300™ manual.
The Summit 300™ switch requires ExtremeWare 6.2a.1.1.0 (or later) in order to recognize the Altitude 300-2i™Wireless Port.
The Summit 300™ switch requires ExtremeWare 6.2a.1.1.1 (or later) in order to recognize the Altitude 300-2d™Wireless Port.
18 | Altitude 300-2™ Getting Started Guide |