DReglatory Compliances
Overview
The Altitude 300-2TMwireless port is manufactured by Extreme Networks in four configurations called requlatory domains. Each regulatory domain includes countries that share similar regulatory requirements. Please refer to the table below for these requlatory domains and there coresponding countries or go to http://www.extremenetworks.com/go/rfcertification.htm for the most up to date information. It is the responsability of the end user to obtain the proper Altitude 300-2TMrequlatory domain for use in the intended country of operation.
The end user is also responsible to install the latest version of software made available by Extreme Networks to ensure compliance with country requirements and restrictions within each system installation. Since countries are opening up new frequencies and changing output power limits it is advantageous to maintain the latest software version to take advantage of these improvements. Please consult the software manual of the PoE WLAN switch for detailed instructions for installing and upgrading software.
NOTE
The Altitude 300-2TMis configured and managed by the PoE WLAN switch connected to the Altitude 300-2TM. Please consult the software manual of the PoE WLAN switch to properly configure the Altitude 300-2TM.
NOTE
Go to http://www.extremenetworks.com/go/rfcertification.htm for the most up to data list of countries the Altitude 300-2 has been certified to operate within.
Altitude 300-2™ Getting Started Guide | 43 |