Hardware Installation
Optional Antenna Shrouds
Antenna shrouds are used with the Altitude 300-2i™that has integrated dual band antennas. They are an optional item that is ordered with one of the plastic cover kits. Before the plastic cover is snapped on, each antenna shroud is slipped over the antenna housing so that the gear teeth are next to the box. The shroud is slipped all the way down on the antenna housing until it is firmly seated on the antenna tube that comes out of the box. The shroud clips on to the tube. With the shroud installed, the antenna is still free to be rotated to the desired angle. The process is repeated for the other side of the box.
Figure 8: Antenna Shroud | Figure 9: Antenna Shroud Installation |
26 | Altitude 300-2™ Getting Started Guide |
